Skip to main navigation Skip to search Skip to main content

Variation of piezoelectric properties and mechanisms across the relaxor-like/Ferroelectric continuum in BiFeO3- (K0.5Bi0.5)TiO3-PbTiO3 ceramics

  • James Bennett
  • , Thomas Shrout
  • , Shujun Zhang
  • , Heather Owston
  • , Tim Stevenson
  • , Faye Esat
  • , Andrew Bell
  • , T. Comyn

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

Abstract

1- x - y)BiFeO3-x(K0.5Bi0.5)TiO3-yPbTiO3 (BFKBT- PT) piezoelectric ceramics were investigated across the compositional space and contrasted against the xBiFeO3- (1-x)(K0.5Bi0.5)TiO3 (BF-KBT) system, whereby a range of relaxor-like/ferroelectric behavior was observed. Structural and piezoelectric properties were closely related to the PbTiO3 concentration; below a critical concentration, relaxor-like behavior was identified. The mechanisms governing the piezoelectric behavior were investigated with structural, electrical, and imaging techniques. X-ray diffraction established that longrange non-centrosymmetric crystallographic order was evident above a critical PbTiO3 concentration, y > 0.1125. Commensurate with the structural analysis, electric-field-induced strain responses showed electrostrictive behavior in the PbTiO3-reduced compositions, with increased piezoelectric switching in PbTiO3-rich compositions. Positive-up-negative-down (PUND) analysis was used to confirm electric-field-induced polarization measurements, elucidating that the addition of PbTiO3 increased the switchable polarization and ferroelectric ordering. Piezoresponse force microscopy (PFM) of the BF-KBT-PT system exhibited typical domain patterns above a critical PbTiO3 threshold, with no ferroelectric domains observed in the BF-KBT system in the pseudocubic region. Doping of BiFeO3-PbTiO3 has been unsuccessful in the search for hightemperature materials that offer satisfactory piezoelectric properties; however, this system demonstrates that the partial substitution of alternative end-members can be an effective method. The partial substitution of PbTiO3 into BF-KBT enables long-range non-centrosymmetric crystallographic order, resulting in increased polar order and TC, compared with the pseudocubic region. The search for novel high-temperature piezoelectric ceramics can therefore exploit the accommodating nature of the perovskite family, which allows significant variance in chemical and physical characters in the exploration of new solid-solutions. © 1986-2012 IEEE.
Original languageEnglish
Article numberA9
Pages (from-to)33-45
JournalIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Volume62
Issue number1
DOIs
Publication statusPublished - 1 Jan 2015
Externally publishedYes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Fingerprint

Dive into the research topics of 'Variation of piezoelectric properties and mechanisms across the relaxor-like/Ferroelectric continuum in BiFeO3- (K0.5Bi0.5)TiO3-PbTiO3 ceramics'. Together they form a unique fingerprint.

Cite this