Two-Step Chemical Vapor Deposition-Synthesized Lead-Free All-Inorganic Cs3Sb2BrPerovskite Microplates for Optoelectronic Applications

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

View graph of relations

Detail(s)

Original languageEnglish
Journal / PublicationACS Applied Materials and Interfaces
Volume13
Issue number30
Online published21 Jul 2021
Publication statusPublished - 4 Aug 2021

Abstract

Lead-based halide perovskites (APbX3, where A = organic or inorganic cation, X = Cl, Br, I) are suitable materials for many optoelectronic devices due to their many attractive properties. However, the concern of lead toxicity and the poor ambient and operational stability of the organic cation group greatly limit their practical utilization. Therefore, there has recently been great interest in lead-free, environment-friendly all-inorganic halide perovskites (IHPs). Sb and Sn are common species suggested to replace Pb for Pb-free IHPs. However, the large difference in the melting points of the precursor materials (e.g., CsBr and SbBr3 precursors for Cs3Sb2Br9) makes the chemical vapor deposition (CVD) growth of high-quality Pb-free IHPs a very challenging task. In this work, we developed a two-step CVD method to overcome this challenge and successfully synthesized Pb-free Cs3Sb2Br9 perovskite microplates. Cs3Sb2Br9 microplates ∼25 μm in size with the exciton absorption peak at ∼2.8 eV and a band gap of ∼2.85 eV were obtained. The microplates have a smooth hexagonal morphology and show a large Stokes shift of ∼450 meV and exciton binding energy of ∼200 meV. To demonstrate the applications of these microplates in optoelectronics, simple photoconductive devices were fabricated. These photodetectors exhibit a current on/off ratio of 2.36 × 102, a responsivity of 36.9 mA/W, and a detectivity of 1.0 × 1010 Jones with a fast response of rise and decay time of 61.5 and 24 ms, respectively, upon 450 nm photon irradiation. Finally, the Cs3Sb2Brmicroplates also show good stability in ambient air without encapsulation. These results demonstrate that the 2-step CVD process is an effective approach to synthesize high-quality all-inorganic lead-free Cs3Sb2Br9 perovskite microplates that have the potential for future high-performance optoelectronic device applications.

Research Area(s)

  • all-inorganic, chemical vapor deposition, Cs3Sb2Br9, lead-free perovskite, microplates, photodetector

Citation Format(s)

Two-Step Chemical Vapor Deposition-Synthesized Lead-Free All-Inorganic Cs3Sb2BrPerovskite Microplates for Optoelectronic Applications. / Shil, Sujit Kumer; Wang, Fei; Egbo, Kingsley O.; Lai, Zhengxun; Wang, Ying; Wang, Yunpeng; Zhao, Dongxu; Tsang, Sai-Wing; Ho, Johnny C.; Yu, Kin Man.

In: ACS Applied Materials and Interfaces, Vol. 13, No. 30, 04.08.2021.

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review