Two-mode boiling on a horizontal heating wire: Effects of liquid subcoolings

D. J. Lee

doi:10.1016/S0017-9310(98)00022-2

Two-mode boiling on a horizontal heating wire: Effects of liquid subcoolings

D. J. Lee

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

10 Citations (Scopus)

Abstract

The steady-state boiling curves of methanol boiled on an electrically heated tungsten wire, including the nucleate boiling curve, the film boiling curve, and the equilibrium line located in between are reported with liquid subcooling as a parameter. As liquid subcooling increases, the critical heat flux becomes greater, the film boiling mode more efficient, and the equilibrium line shifts upwards. A lower liquid temperature results in a more stable nucleate boiling mode. However, at a very high liquid subcooling, the steady-state boiling curves are not influenced by the liquid subcooling. © 1998 Elsevier Science Ltd. All rights reserved.

Original language	English
Pages (from-to)	2925-2928
Journal	International Journal of Heat and Mass Transfer
Volume	41
Issue number	19
DOIs	https://doi.org/10.1016/S0017-9310(98)00022-2
Publication status	Published - 1998
Externally published	Yes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Access Output

10.1016/S0017-9310(98)00022-2

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{42cdd039baca4731b8dcce9e3337f415,

title = "Two-mode boiling on a horizontal heating wire: Effects of liquid subcoolings",

abstract = "The steady-state boiling curves of methanol boiled on an electrically heated tungsten wire, including the nucleate boiling curve, the film boiling curve, and the equilibrium line located in between are reported with liquid subcooling as a parameter. As liquid subcooling increases, the critical heat flux becomes greater, the film boiling mode more efficient, and the equilibrium line shifts upwards. A lower liquid temperature results in a more stable nucleate boiling mode. However, at a very high liquid subcooling, the steady-state boiling curves are not influenced by the liquid subcooling. {\textcopyright} 1998 Elsevier Science Ltd. All rights reserved.",

author = "Lee, \{D. J.\}",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected]. ",

year = "1998",

doi = "10.1016/S0017-9310(98)00022-2",

language = "English",

volume = "41",

pages = "2925--2928",

journal = "International Journal of Heat and Mass Transfer",

issn = "0017-9310",

publisher = "Elsevier Ltd.",

number = "19",

}

TY - JOUR

T1 - Two-mode boiling on a horizontal heating wire

T2 - Effects of liquid subcoolings

AU - Lee, D. J.

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 1998

Y1 - 1998

N2 - The steady-state boiling curves of methanol boiled on an electrically heated tungsten wire, including the nucleate boiling curve, the film boiling curve, and the equilibrium line located in between are reported with liquid subcooling as a parameter. As liquid subcooling increases, the critical heat flux becomes greater, the film boiling mode more efficient, and the equilibrium line shifts upwards. A lower liquid temperature results in a more stable nucleate boiling mode. However, at a very high liquid subcooling, the steady-state boiling curves are not influenced by the liquid subcooling. © 1998 Elsevier Science Ltd. All rights reserved.

AB - The steady-state boiling curves of methanol boiled on an electrically heated tungsten wire, including the nucleate boiling curve, the film boiling curve, and the equilibrium line located in between are reported with liquid subcooling as a parameter. As liquid subcooling increases, the critical heat flux becomes greater, the film boiling mode more efficient, and the equilibrium line shifts upwards. A lower liquid temperature results in a more stable nucleate boiling mode. However, at a very high liquid subcooling, the steady-state boiling curves are not influenced by the liquid subcooling. © 1998 Elsevier Science Ltd. All rights reserved.

UR - https://www.scopus.com/pages/publications/0032189760

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-0032189760&origin=recordpage

U2 - 10.1016/S0017-9310(98)00022-2

DO - 10.1016/S0017-9310(98)00022-2

M3 - RGC 21 - Publication in refereed journal

SN - 0017-9310

VL - 41

SP - 2925

EP - 2928

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

IS - 19

ER -

Two-mode boiling on a horizontal heating wire: Effects of liquid subcoolings

Abstract

Bibliographical note

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this