Titanium-containing high entropy oxide (Ti-HEO): A redox expediting electrocatalyst towards lithium polysulfides for high performance Li-S batteries

Since lithium sulfur (Li-S) energy storage devices are anticipated to power portable gadgets and electric vehicles owing to their high energy density (2600 Wh·kg^–1); nevertheless, their usefulness is constrained by sluggish sulfur reaction kinetics and soluble lithium polysulfide (LPS) shuttling effects. High electrically conductive bifunctional electrocatalysts are urgently needed for Li-S batteries, and high-entropy oxide (HEO) is one of the most promising electrocatalysts. In this work, we synthesize titanium-containing high entropy oxide (Ti-HEO) (TiFeNiCoMg)O with enhanced electrical conductivity through calcining metal-organic frameworks (MOF) templates at modest temperatures. The resulting single-phase Ti-HEO with high conductivity could facilitate chemical immobilization and rapid bidirectional conversion of LPS. As a result, the Ti-HEO/S/KB cathode (with 70 wt.% of sulfur) achieves an initial discharge capacity as high as ~1375 mAh·g^–1 at 0.1 C, and a low-capacity fade rate of 0.056% per cycle over 1000 cycles at 0.5 C. With increased sulfur loading (~5.0 mg·cm^–2), the typical Li-S cell delivered a high initial discharge capacity of ~607 mAh·g^–1 at 0.2 C and showcased good cycling stability. This work provides better insight into the synthesis of catalytic Ti-containing HEOs with enhanced electrical conductivity, which are effective in simultaneously enhancing the LPS-conversion kinetics and reducing the LPS shuttling effect. © The Author(s) 2024.