Skip to main navigation Skip to search Skip to main content

The mechanical and tribological properties of CrBN-Ni-Cu-O coatings with different Ni and Cu contents

  • Qianzhi Wang*
  • , Mingling Zhou
  • , Xuxin Jin
  • , Fei Zhou
  • , Zhifeng Zhou
  • *Corresponding author for this work

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

Abstract

Based on the advantages of Ni or Cu incorporation to the mechanical and tribological properties of nitride coatings, the co-incorporation of Ni and Cu at different ratios was employed on CrBN coatings. Results showed that Ni (11.01 at%) and Cu (3.41 at%) co-incorporation increased hardness from 24.4 GPa to 26.4 GPa. As a consequence, coatings wear rate decreased from 6.4 × 10−7 mm3/Nm to 5.4 × 10−7 mm3/Nm. At the meantime, friction coefficient declined from 0.30 to 0.28 due to CuO lubricating layer. However, when Cu content was high (10.68 or 15.05 at.%), the hardness of Ni-Cu-CrBN coatings sharply declined, which weakened wear resistance and increased friction coefficient. It indicated that Ni (11.01 at%) and Cu (3.41 at%) was the proper co-incorporation combination.
Original languageEnglish
Article number204167
JournalWear
Volume488-489
Online published2 Nov 2021
DOIs
Publication statusPublished - 15 Jan 2022

Research Keywords

  • CrBN coating
  • Hardness
  • Incorporation
  • Plastic deformation
  • Tribology

Fingerprint

Dive into the research topics of 'The mechanical and tribological properties of CrBN-Ni-Cu-O coatings with different Ni and Cu contents'. Together they form a unique fingerprint.

Cite this