Synthesis of porous carbon supported palladium nanoparticle catalysts by atomic layer deposition: Application for rechargeable lithium-O2 battery

Yu Lei; Jun Lu; Xiangyi Luo; Tianpin Wu; Peng Du; Xiaoyi Zhang; Yang Ren; Jianguo Wen; Dean J. Miller; Jeffrey T. Miller; Yang-Kook Sun; Jeffrey W. Elam; Khalil Amine

doi:10.1021/nl401833p

Synthesis of porous carbon supported palladium nanoparticle catalysts by atomic layer deposition: Application for rechargeable lithium-O₂ battery

Yu Lei
, Jun Lu
, Xiangyi Luo
, Tianpin Wu
, Peng Du
, Xiaoyi Zhang
, Yang Ren
, Jianguo Wen
, Dean J. Miller
, Jeffrey T. Miller
, Yang-Kook Sun
, Jeffrey W. Elam
, Khalil Amine

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

191 Citations (Scopus)

Abstract

In this study, atomic layer deposition (ALD) was used to deposit nanostructured palladium on porous carbon as the cathode material for Li-O ₂ cells. Scanning transmission electron microscopy showed discrete crystalline nanoparticles decorating the surface of the porous carbon support, where the size could be controlled in the range of 2-8 nm and depended on the number of Pd ALD cycles performed. X-ray absorption spectroscopy at the Pd K-edge revealed that the carbon supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The conformality of ALD allowed us to uniformly disperse the Pd catalyst onto the carbon support while preserving the initial porous structure. As a result, the charging and discharging performance of the oxygen cathode in a Li-O₂ cell was improved. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports in energy storage devices. © 2013 American Chemical Society.

Original language	English
Pages (from-to)	4182-4189
Journal	Nano Letters
Volume	13
Issue number	9
DOIs	https://doi.org/10.1021/nl401833p
Publication status	Published - 11 Sept 2013
Externally published	Yes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Research Keywords

atomic layer deposition
Li-O2 battery
oxygen evolution reaction
oxygen reduction reaction
palladium nanoparticles

Access Output

10.1021/nl401833p

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{88941abe9c2b432c8cc74d7bec36a1cd,

title = "Synthesis of porous carbon supported palladium nanoparticle catalysts by atomic layer deposition: Application for rechargeable lithium-O2 battery",

abstract = "In this study, atomic layer deposition (ALD) was used to deposit nanostructured palladium on porous carbon as the cathode material for Li-O 2 cells. Scanning transmission electron microscopy showed discrete crystalline nanoparticles decorating the surface of the porous carbon support, where the size could be controlled in the range of 2-8 nm and depended on the number of Pd ALD cycles performed. X-ray absorption spectroscopy at the Pd K-edge revealed that the carbon supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The conformality of ALD allowed us to uniformly disperse the Pd catalyst onto the carbon support while preserving the initial porous structure. As a result, the charging and discharging performance of the oxygen cathode in a Li-O2 cell was improved. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports in energy storage devices. {\textcopyright} 2013 American Chemical Society.",

keywords = "atomic layer deposition, Li-O2 battery, oxygen evolution reaction, oxygen reduction reaction, palladium nanoparticles",

author = "Yu Lei and Jun Lu and Xiangyi Luo and Tianpin Wu and Peng Du and Xiaoyi Zhang and Yang Ren and Jianguo Wen and Miller, \{Dean J.\} and Miller, \{Jeffrey T.\} and Yang-Kook Sun and Elam, \{Jeffrey W.\} and Khalil Amine",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "2013",

month = sep,

day = "11",

doi = "10.1021/nl401833p",

language = "English",

volume = "13",

pages = "4182--4189",

journal = "Nano Letters",

issn = "1530-6984",

publisher = "American Chemical Society",

number = "9",

}

TY - JOUR

T1 - Synthesis of porous carbon supported palladium nanoparticle catalysts by atomic layer deposition

T2 - Application for rechargeable lithium-O2 battery

AU - Lei, Yu

AU - Lu, Jun

AU - Luo, Xiangyi

AU - Wu, Tianpin

AU - Du, Peng

AU - Zhang, Xiaoyi

AU - Ren, Yang

AU - Wen, Jianguo

AU - Miller, Dean J.

AU - Miller, Jeffrey T.

AU - Sun, Yang-Kook

AU - Elam, Jeffrey W.

AU - Amine, Khalil

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2013/9/11

Y1 - 2013/9/11

N2 - In this study, atomic layer deposition (ALD) was used to deposit nanostructured palladium on porous carbon as the cathode material for Li-O 2 cells. Scanning transmission electron microscopy showed discrete crystalline nanoparticles decorating the surface of the porous carbon support, where the size could be controlled in the range of 2-8 nm and depended on the number of Pd ALD cycles performed. X-ray absorption spectroscopy at the Pd K-edge revealed that the carbon supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The conformality of ALD allowed us to uniformly disperse the Pd catalyst onto the carbon support while preserving the initial porous structure. As a result, the charging and discharging performance of the oxygen cathode in a Li-O2 cell was improved. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports in energy storage devices. © 2013 American Chemical Society.

AB - In this study, atomic layer deposition (ALD) was used to deposit nanostructured palladium on porous carbon as the cathode material for Li-O 2 cells. Scanning transmission electron microscopy showed discrete crystalline nanoparticles decorating the surface of the porous carbon support, where the size could be controlled in the range of 2-8 nm and depended on the number of Pd ALD cycles performed. X-ray absorption spectroscopy at the Pd K-edge revealed that the carbon supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The conformality of ALD allowed us to uniformly disperse the Pd catalyst onto the carbon support while preserving the initial porous structure. As a result, the charging and discharging performance of the oxygen cathode in a Li-O2 cell was improved. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports in energy storage devices. © 2013 American Chemical Society.

KW - atomic layer deposition

KW - Li-O2 battery

KW - oxygen evolution reaction

KW - oxygen reduction reaction

KW - palladium nanoparticles

UR - https://www.scopus.com/pages/publications/84884262479

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-84884262479&origin=recordpage

U2 - 10.1021/nl401833p

DO - 10.1021/nl401833p

M3 - RGC 21 - Publication in refereed journal

C2 - 23927754

SN - 1530-6984

VL - 13

SP - 4182

EP - 4189

JO - Nano Letters

JF - Nano Letters

IS - 9

ER -