Study of micro-BGA solder joint reliability

A new reflow parameter, heating factor (Q_η), which is defined as the integral of the measured temperature over the dwell time above liquidus, has been proposed in this report. It can suitably represent the combined effect of both temperature and time in usual reflow process. Relationship between reliability of the micro-ball grid array (micro-BGA) package and heating factor has been discussed. The fatigue failure of micro-BGA solder joints reflowed with different heating factor in nitrogen ambient has been investigated using the bending cycle test. The fatigue lifetime of the micro-BGA assemblies firstly increases and then decreases with increasing heating factor. The greatest lifetime happens at Q_η near 500 s°C. The optimal Q_η range is between 300 and 750 s°C. In this range, the lifetime of the micro-BGA assemblies is greater than 4500 cycles. SEM micrographs reveal that cracks always initiate at the point of the acute angle where the solder joint joins the PCB pad.