Study of interface problems using finite element method

Li-Jun Su; Hong-Jian Liao; Shan-Yong Wang; Wen-Bing Wei

doi:10.4028/0-87849-456-1.953

Study of interface problems using finite element method

Li-Jun Su
, Hong-Jian Liao
, Shan-Yong Wang
, Wen-Bing Wei

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

1 Citation (Scopus)

Abstract

In numerical simulation of engineering problems, it is important to properly simulate the interface between two adjacent parts of the model. In finite element method, there are generally three methods for simulating interface problems: interface element method, surface based contact method and the method by using a thin layer of continuum elements. In this paper, simulation of interface problems is conducted using continuum elements and surface based contact methods. The results from each method are presented and compared with each other.
© 2007 Trans Tech Publications Ltd, Switzerland

Original language	English
Pages (from-to)	953-956
Journal	Key Engineering Materials
Volume	353-358
Issue number	PART 2
DOIs	https://doi.org/10.4028/0-87849-456-1.953
Publication status	Published - 2007
Event	Asian Pacific Conference for Fracture and Strength (APCFS'06) - Sanya, Hainan Island, China Duration: 22 Nov 2006 → 25 Nov 2006

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

Continuum elements
Interface problem
Surface based contact

Access Output

10.4028/0-87849-456-1.953

https://doi.org/10.4028/www.scientific.net/KEM.353-358.953

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{9361c74342c54a779d1b866a36d15fb1,

title = "Study of interface problems using finite element method",

abstract = "In numerical simulation of engineering problems, it is important to properly simulate the interface between two adjacent parts of the model. In finite element method, there are generally three methods for simulating interface problems: interface element method, surface based contact method and the method by using a thin layer of continuum elements. In this paper, simulation of interface problems is conducted using continuum elements and surface based contact methods. The results from each method are presented and compared with each other. {\textcopyright} 2007 Trans Tech Publications Ltd, Switzerland",

keywords = "Continuum elements, Interface problem, Surface based contact",

author = "Li-Jun Su and Hong-Jian Liao and Shan-Yong Wang and Wen-Bing Wei",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].; Asian Pacific Conference for Fracture and Strength (APCFS'06) ; Conference date: 22-11-2006 Through 25-11-2006",

year = "2007",

doi = "10.4028/0-87849-456-1.953",

language = "English",

volume = "353-358",

pages = "953--956",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd.",

number = "PART 2",

}

TY - JOUR

T1 - Study of interface problems using finite element method

AU - Su, Li-Jun

AU - Liao, Hong-Jian

AU - Wang, Shan-Yong

AU - Wei, Wen-Bing

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2007

Y1 - 2007

N2 - In numerical simulation of engineering problems, it is important to properly simulate the interface between two adjacent parts of the model. In finite element method, there are generally three methods for simulating interface problems: interface element method, surface based contact method and the method by using a thin layer of continuum elements. In this paper, simulation of interface problems is conducted using continuum elements and surface based contact methods. The results from each method are presented and compared with each other. © 2007 Trans Tech Publications Ltd, Switzerland

AB - In numerical simulation of engineering problems, it is important to properly simulate the interface between two adjacent parts of the model. In finite element method, there are generally three methods for simulating interface problems: interface element method, surface based contact method and the method by using a thin layer of continuum elements. In this paper, simulation of interface problems is conducted using continuum elements and surface based contact methods. The results from each method are presented and compared with each other. © 2007 Trans Tech Publications Ltd, Switzerland

KW - Continuum elements

KW - Interface problem

KW - Surface based contact

UR - https://www.scopus.com/pages/publications/36049045855

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-36049045855&origin=recordpage

U2 - 10.4028/0-87849-456-1.953

DO - 10.4028/0-87849-456-1.953

M3 - RGC 21 - Publication in refereed journal

SN - 1013-9826

VL - 353-358

SP - 953

EP - 956

JO - Key Engineering Materials

JF - Key Engineering Materials

IS - PART 2

T2 - Asian Pacific Conference for Fracture and Strength (APCFS'06)

Y2 - 22 November 2006 through 25 November 2006

ER -

Study of interface problems using finite element method

Abstract

Bibliographical note

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this