Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks

Jing Fan; Xiao Hu; Chee Yoon Yue

doi:10.1002/app.11969

Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks

Jing Fan, Xiao Hu, Chee Yoon Yue

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

58 Citations (Scopus)

Abstract

Interpenetrating polymer networks (IPNs) based on different ratios of modified bismaleimide (BMI) resin [BMI/2,2′-diallylbisphenol A (DBA)] and cyanate ester (CE) (b10) have been synthesized via prepolymerization followed by thermal curing. A systematic study of both static and dynamic mechanical properties of the cured BMI/DBA-CE IPN resin systems was conducted through flexural, impact testing, and dynamic mechanical analysis (DMA), The static mechanical investigation shows that the flexural strength, flexural strain at break, and impact strength of the cured BMI/DBA-CE IPN resin systems are relatively lower than that calculated by rule of mixture of two individuals: BMI/DBA and b10. However, the flexural moduli of the IPN resin systems have more consistent features compared to that calculated by rule of mixture. Single damping peaks are detected for the cured BMI/DBA-CE IPN resin systems, which suggests a substantial degree of interpenetration between two networks. The damping peaks of the cured BMI/DBA-CE IPN resin systems do tend to become broader with increasing concentration of BMI/DBA, whereas the intensity of damping peaks of the IPN resin systems decreases. The obtained results not only provide insight information about the characteristic structures of these BMI/DBA-CE IPN resin systems, but also give guidelines for their applications. © 2003 Wiley Periodicals, Inc.

Original language	English
Pages (from-to)	2000-2006
Journal	Journal of Applied Polymer Science
Volume	88
Issue number	8
DOIs	https://doi.org/10.1002/app.11969
Publication status	Published - 23 May 2003
Externally published	Yes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

Bismaleimide
Cyanate ester
Interpenetrating networks
Mechanical properties
Thermodynamics

Access Output

10.1002/app.11969

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{a125bf339c2940fd9b0311c625e84e4d,

title = "Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks",

abstract = "Interpenetrating polymer networks (IPNs) based on different ratios of modified bismaleimide (BMI) resin [BMI/2,2′-diallylbisphenol A (DBA)] and cyanate ester (CE) (b10) have been synthesized via prepolymerization followed by thermal curing. A systematic study of both static and dynamic mechanical properties of the cured BMI/DBA-CE IPN resin systems was conducted through flexural, impact testing, and dynamic mechanical analysis (DMA), The static mechanical investigation shows that the flexural strength, flexural strain at break, and impact strength of the cured BMI/DBA-CE IPN resin systems are relatively lower than that calculated by rule of mixture of two individuals: BMI/DBA and b10. However, the flexural moduli of the IPN resin systems have more consistent features compared to that calculated by rule of mixture. Single damping peaks are detected for the cured BMI/DBA-CE IPN resin systems, which suggests a substantial degree of interpenetration between two networks. The damping peaks of the cured BMI/DBA-CE IPN resin systems do tend to become broader with increasing concentration of BMI/DBA, whereas the intensity of damping peaks of the IPN resin systems decreases. The obtained results not only provide insight information about the characteristic structures of these BMI/DBA-CE IPN resin systems, but also give guidelines for their applications. {\textcopyright} 2003 Wiley Periodicals, Inc.",

keywords = "Bismaleimide, Cyanate ester, Interpenetrating networks, Mechanical properties, Thermodynamics",

author = "Jing Fan and Xiao Hu and Yue, {Chee Yoon}",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected]. ",

year = "2003",

month = may,

day = "23",

doi = "10.1002/app.11969",

language = "English",

volume = "88",

pages = "2000--2006",

journal = "Journal of Applied Polymer Science",

issn = "0021-8995",

publisher = "John Wiley & Sons",

number = "8",

}

TY - JOUR

T1 - Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks

AU - Fan, Jing

AU - Hu, Xiao

AU - Yue, Chee Yoon

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2003/5/23

Y1 - 2003/5/23

N2 - Interpenetrating polymer networks (IPNs) based on different ratios of modified bismaleimide (BMI) resin [BMI/2,2′-diallylbisphenol A (DBA)] and cyanate ester (CE) (b10) have been synthesized via prepolymerization followed by thermal curing. A systematic study of both static and dynamic mechanical properties of the cured BMI/DBA-CE IPN resin systems was conducted through flexural, impact testing, and dynamic mechanical analysis (DMA), The static mechanical investigation shows that the flexural strength, flexural strain at break, and impact strength of the cured BMI/DBA-CE IPN resin systems are relatively lower than that calculated by rule of mixture of two individuals: BMI/DBA and b10. However, the flexural moduli of the IPN resin systems have more consistent features compared to that calculated by rule of mixture. Single damping peaks are detected for the cured BMI/DBA-CE IPN resin systems, which suggests a substantial degree of interpenetration between two networks. The damping peaks of the cured BMI/DBA-CE IPN resin systems do tend to become broader with increasing concentration of BMI/DBA, whereas the intensity of damping peaks of the IPN resin systems decreases. The obtained results not only provide insight information about the characteristic structures of these BMI/DBA-CE IPN resin systems, but also give guidelines for their applications. © 2003 Wiley Periodicals, Inc.

AB - Interpenetrating polymer networks (IPNs) based on different ratios of modified bismaleimide (BMI) resin [BMI/2,2′-diallylbisphenol A (DBA)] and cyanate ester (CE) (b10) have been synthesized via prepolymerization followed by thermal curing. A systematic study of both static and dynamic mechanical properties of the cured BMI/DBA-CE IPN resin systems was conducted through flexural, impact testing, and dynamic mechanical analysis (DMA), The static mechanical investigation shows that the flexural strength, flexural strain at break, and impact strength of the cured BMI/DBA-CE IPN resin systems are relatively lower than that calculated by rule of mixture of two individuals: BMI/DBA and b10. However, the flexural moduli of the IPN resin systems have more consistent features compared to that calculated by rule of mixture. Single damping peaks are detected for the cured BMI/DBA-CE IPN resin systems, which suggests a substantial degree of interpenetration between two networks. The damping peaks of the cured BMI/DBA-CE IPN resin systems do tend to become broader with increasing concentration of BMI/DBA, whereas the intensity of damping peaks of the IPN resin systems decreases. The obtained results not only provide insight information about the characteristic structures of these BMI/DBA-CE IPN resin systems, but also give guidelines for their applications. © 2003 Wiley Periodicals, Inc.

KW - Bismaleimide

KW - Cyanate ester

KW - Interpenetrating networks

KW - Mechanical properties

KW - Thermodynamics

UR - http://www.scopus.com/inward/record.url?scp=0037462148&partnerID=8YFLogxK

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-0037462148&origin=recordpage

U2 - 10.1002/app.11969

DO - 10.1002/app.11969

M3 - RGC 21 - Publication in refereed journal

SN - 0021-8995

VL - 88

SP - 2000

EP - 2006

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

IS - 8

ER -

Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks

Abstract

Bibliographical note

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this