Skip to main navigation Skip to search Skip to main content

Solution-processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells

Jesse R. Manders, Sai-Wing Tsang, Michael J. Hartel, Tzung-Han Lai, Song Chen, Chad M. Amb, John R. Reynolds, Franky So

Research output: Journal Publications and ReviewsRGC 21 - Publication in refereed journalpeer-review

Abstract

The detailed characterization of solution-derived nickel (II) oxide (NiO) hole-transporting layer (HTL) films and their application in high efficiency organic photovoltaic (OPV) cells is reported. The NiO precursor solution is examined in situ to determine the chemical species present. Coordination complexes of monoethanolamine (MEA) with Ni in ethanol thermally decompose to form non-stoichiometric NiO. Specifically, the [Ni(MEA)2(OAc)] + ion is found to be the most prevalent species in the precursor solution. The defect-induced Ni3+ ion, which is present in non-stoichiometric NiO and signifies the p-type conduction of NiO, as well as the dipolar nickel oxyhydroxide (NiOOH) species are confirmed using X-ray photoelectron spectroscopy. Bulk heterojunction (BHJ) solar cells with a polymer/fullerene photoactive layer blend composed of poly-dithienogermole- thienopyrrolodione (pDTG-TPD) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) are fabricated using these solution-processed NiO films. The resulting devices show an average power conversion efficiency (PCE) of 7.8%, which is a 15% improvement over devices utilizing a poly(3,4- ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) HTL. The enhancement is due to the optical resonance in the solar cell and the hydrophobicity of NiO, which promotes a more homogeneous donor/acceptor morphology in the active layer at the NiO/BHJ interface. Finally, devices incorporating NiO as a HTL are more stable in air than devices using PEDOT:PSS. By replacing poly(3,4- ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole-transporting layers (HTLs) with solution-processed nickel oxide (NiO), polymer photovoltaic cells with a power conversion efficiency of 7.8% are fabricated. Solar cells with NiO are more efficient and more air stable than those with PEDOT:PSS. The HTL/active layer interface plays a critical role in solar cell performance. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Original languageEnglish
Pages (from-to)2993-3001
JournalAdvanced Functional Materials
Volume23
Issue number23
DOIs
Publication statusPublished - 20 Jun 2013
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Research Keywords

  • hole transport layer
  • nickel oxide
  • organic electronics
  • polymer photovoltaics

Fingerprint

Dive into the research topics of 'Solution-processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells'. Together they form a unique fingerprint.

Cite this