Six cases of reliability study of Pb-free solder joints in electronic packaging technology

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

1271 Scopus Citations
View graph of relations

Author(s)

Detail(s)

Original languageEnglish
Pages (from-to)55-105
Journal / PublicationMaterials Science and Engineering: R: Reports
Volume38
Issue number2
Publication statusPublished - 14 Jun 2002
Externally publishedYes

Abstract

Solder is widely used to connect chips to their packaging substrates in flip chip technology as well as in surface mount technology. At present, the electronic packaging industry is actively searching for Pb-free solders due to environmental concern of Pb-based solders. Concerning the reliability of Pb-free solders, some electronic companies are reluctant to adopt them into their high-end products. Hence, a review of the reliability behavior of Pb-free solders is timely. We use the format of "case study" to review six reliability problems of Pb-free solders in electronic packaging technology. We conducted analysis of these cases on the basis of thermodynamic driving force, time-dependent kinetic processes, and morphology and microstructure changes. We made a direct comparison to the similar problem in SnPb solder whenever it is available. Specifically, we reviewed: (1) interfacial reactions between Pb-free solder and thick metalliztion of bond-pad on the substrate-side, (2) interfacial reactions between Pb-free solder and thin-film under-bump metallization on the chip-side, (3) the growth of a layered intermetallic compound (IMC) by ripening in solid state aging of solder joints, (4) a long range interaction between chip-side and substrate-side metallizations across a solder joint, (5) electromigration in flip chip solder joints, and finally (6) Sn whisker growth on Pb-free finish on Cu leadframe. Perhaps, these cases may serve as helpful references to the understanding of other reliability behaviors of Pb-free solders. © 2002 Published by Elsevier Science B.V.

Research Area(s)

  • Electromigration, Intermetallic compounds, Lead-free, Reliability, Sn whisker, Solder interfacial reaction, Solder joints

Bibliographic Note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to lbscholars@cityu.edu.hk.