Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics

Changchao Gu; Yihai He; Yi Wei; Xu Ming

doi:10.1109/icrse.2015.7366468

Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics

Changchao Gu^*
, Yihai He
, Yi Wei
, Xu Ming

^*Corresponding author for this work

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

8 Citations (Scopus)

Abstract

With the increasing requirements of product reliability and complexity of manufacturing system, the limitation of traditional reliability analysis of manufacturing systems neither considered product quality, nor the weight of key stations. Therefore, aiming at improving the product reliability, a reliability modeling of manufacturing systems based on the task network evolved by key quality characteristics is presented. Firstly, to identify the key task nodes of manufacturing system, the relationship between manufacturing system and product reliability was established in view of axiomatic design (AD), and the task network model evolved by product key quality characteristics was proposed based on axiomatic design theory successively. Then the reliability analysis model of manufacturing systems was put forward based on the capacity and failure rate of the key task nodes. Finally, a reliability analysis case of a piston ring machining system is given to verify the availability of the model.

Original language	English
Title of host publication	PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE
Publisher	IEEE
ISBN (Electronic)	978-1-4673-8557-2
DOIs	https://doi.org/10.1109/icrse.2015.7366468
Publication status	Published - 2015
Event	1st International Conference on Reliability Systems Engineering (ICRSE) - Beijing, China Duration: 21 Oct 2015 → 23 Oct 2015

Conference

Conference	1st International Conference on Reliability Systems Engineering (ICRSE)
Place	China
City	Beijing
Period	21/10/15 → 23/10/15

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Research Keywords

key quality characteristics
manufacturing system
reliability analysis
axiomatic design (AD)
workflow network (WF-net)

Access Output

10.1109/icrse.2015.7366468

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@inproceedings{7f4f9786fc134a4a967198ca5af2d728,

title = "Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics",

abstract = "With the increasing requirements of product reliability and complexity of manufacturing system, the limitation of traditional reliability analysis of manufacturing systems neither considered product quality, nor the weight of key stations. Therefore, aiming at improving the product reliability, a reliability modeling of manufacturing systems based on the task network evolved by key quality characteristics is presented. Firstly, to identify the key task nodes of manufacturing system, the relationship between manufacturing system and product reliability was established in view of axiomatic design (AD), and the task network model evolved by product key quality characteristics was proposed based on axiomatic design theory successively. Then the reliability analysis model of manufacturing systems was put forward based on the capacity and failure rate of the key task nodes. Finally, a reliability analysis case of a piston ring machining system is given to verify the availability of the model.",

keywords = "key quality characteristics, manufacturing system, reliability analysis, axiomatic design (AD), workflow network (WF-net)",

author = "Changchao Gu and Yihai He and Yi Wei and Xu Ming",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].; 1st International Conference on Reliability Systems Engineering (ICRSE) ; Conference date: 21-10-2015 Through 23-10-2015",

year = "2015",

doi = "10.1109/icrse.2015.7366468",

language = "English",

booktitle = "PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE",

publisher = "IEEE",

address = "United States",

}

Gu, C, He, Y, Wei, Y & Ming, X 2015, Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics. in PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE. IEEE, 1st International Conference on Reliability Systems Engineering (ICRSE), Beijing, China, 21/10/15. https://doi.org/10.1109/icrse.2015.7366468

Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics. / Gu, Changchao; He, Yihai; Wei, Yi et al.
PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE. IEEE, 2015.

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

TY - GEN

T1 - Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics

AU - Gu, Changchao

AU - He, Yihai

AU - Wei, Yi

AU - Ming, Xu

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2015

Y1 - 2015

N2 - With the increasing requirements of product reliability and complexity of manufacturing system, the limitation of traditional reliability analysis of manufacturing systems neither considered product quality, nor the weight of key stations. Therefore, aiming at improving the product reliability, a reliability modeling of manufacturing systems based on the task network evolved by key quality characteristics is presented. Firstly, to identify the key task nodes of manufacturing system, the relationship between manufacturing system and product reliability was established in view of axiomatic design (AD), and the task network model evolved by product key quality characteristics was proposed based on axiomatic design theory successively. Then the reliability analysis model of manufacturing systems was put forward based on the capacity and failure rate of the key task nodes. Finally, a reliability analysis case of a piston ring machining system is given to verify the availability of the model.

AB - With the increasing requirements of product reliability and complexity of manufacturing system, the limitation of traditional reliability analysis of manufacturing systems neither considered product quality, nor the weight of key stations. Therefore, aiming at improving the product reliability, a reliability modeling of manufacturing systems based on the task network evolved by key quality characteristics is presented. Firstly, to identify the key task nodes of manufacturing system, the relationship between manufacturing system and product reliability was established in view of axiomatic design (AD), and the task network model evolved by product key quality characteristics was proposed based on axiomatic design theory successively. Then the reliability analysis model of manufacturing systems was put forward based on the capacity and failure rate of the key task nodes. Finally, a reliability analysis case of a piston ring machining system is given to verify the availability of the model.

KW - key quality characteristics

KW - manufacturing system

KW - reliability analysis

KW - axiomatic design (AD)

KW - workflow network (WF-net)

UR - http://gateway.isiknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=LinksAMR&SrcApp=PARTNER_APP&DestLinkType=FullRecord&DestApp=WOS&KeyUT=000380485700055

U2 - 10.1109/icrse.2015.7366468

DO - 10.1109/icrse.2015.7366468

M3 - RGC 32 - Refereed conference paper (with host publication)

BT - PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE

PB - IEEE

T2 - 1st International Conference on Reliability Systems Engineering (ICRSE)

Y2 - 21 October 2015 through 23 October 2015

ER -

Reliability Modeling of Manufacturing Systems Based on the Task Network Evolved by Key Quality Characteristics

Abstract

Conference

Bibliographical note

UN SDGs

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this