Skip to main navigation Skip to search Skip to main content

Relaxation of liquid-crystalline polymer fibers in polycarbonate-liquid-crystalline polymer blend system

  • L. P. Tan
  • , C. Y. Yue
  • , K. C. Tam
  • , Y. C. Lam
  • , X. Hu
  • , K. Nakayama

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

Abstract

The relaxation of liquid-crystalline polymer (LCP) fibers in the polycarbonate (PC)/LCP blend was examined under various conditions on a hot-stage microscope. LC5000 is a thermotropic LCP consisting of 80/20 hydroxybenzoic acid and poly(terephthalate). The geometry of the fibers is not an important factor in the relaxation process. Fibers of different aspect ratios and lengths relaxed at the same rate and exhibited identical onset times. Increasing the temperature caused the fibers to relax faster, especially near the nematic-transition temperature. The fibers relaxed almost immediately when subjected to a temperature of 285°C. At 280°C the fibers were stable for 43 min, whereas at 270°C no noticeable relaxation was evident. Addition of compatibilizer stabilized the fibers by enhancing the interfacial adhesion between the fibers and the PC matrix. Consequently, LCP fibers in the compatibilized system relaxed at a much higher temperature (294°C) as compared with the uncompatibilized system (275-280°C).
Original languageEnglish
Pages (from-to)2307-2312
JournalJournal of Polymer Science, Part B: Polymer Physics
Volume41
Issue number19
DOIs
Publication statusPublished - 1 Oct 2003
Externally publishedYes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

  • Compatibilization
  • Fiber relaxation
  • LCP

Fingerprint

Dive into the research topics of 'Relaxation of liquid-crystalline polymer fibers in polycarbonate-liquid-crystalline polymer blend system'. Together they form a unique fingerprint.

Cite this