Abstract
A commercial thermotropic liquid crystalline polymer (LCP), Vectra A950, was injection molded into rectangular sheets of thickness ranging from 1 to 4 mm. By changing the thickness of the mold, the shear rate experienced by the TLCP melt in the mold could be varied. The 1-mm test sample was highly anisotropic while that with larger thickness (4 mm) was less anisotropic. X-ray diffraction profile at various depths for each of the test sample corresponded to the degree in the fiber orientation present in the test samples. The anisotropy can be described macroscopically by measuring the tensile strength and modulus in the longitudinal and transverse direction. The ratio between the longitudinal and transverse property decreases proportionally to the thickness of the test sample. This reduction corresponded to the reduction in the shear field as the thickness of the mold was increased.
| Original language | English |
|---|---|
| Pages (from-to) | 1713-1718 |
| Journal | Journal of Applied Polymer Science |
| Volume | 88 |
| Issue number | 7 |
| DOIs | |
| Publication status | Published - 16 May 2003 |
| Externally published | Yes |
Bibliographical note
Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].Research Keywords
- Liquid crystalline polymers (LCP)
- Orientation
Fingerprint
Dive into the research topics of 'Relationship between processing, microstructure, and mechanical properties of injection molded thermotropic LCP'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver