Production systems engineering: Problems, solutions, and applications

Jingshan Li; Semyon M. Meerkov; Liang Zhang

doi:10.3182/20090603-3-RU-2001.0580

Production systems engineering: Problems, solutions, and applications

Jingshan Li
, Semyon M. Meerkov
, Liang Zhang

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

3 Citations (Scopus)

Abstract

Production Systems Engineering (PSE) is an emerging branch of Engineering intended to uncover fundamental principles of production systems and utilize them for analysis, continuous improvement, and design. In PSE, manufacturing systems are addressed based on first principles and at the same level of rigor as that in other engineering disciplines. This paper is intended to give a general characterization of PSE and consider, in some details, several PSE problems. Specifically, the problems of performance analysis, bottlenecks, leanness, system-theoretic properties, and transient behavior are addressed. In addition, several case studies are described and the PSE Toolbox, which implements the techniques and algorithms developed, is presented. © 2009 IFAC.

Original language	English
Title of host publication	Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09
Publisher	IFAC Secretariat
Pages	1-14
Volume	13
ISBN (Print)	9783902661432
DOIs	https://doi.org/10.3182/20090603-3-RU-2001.0580
Publication status	Published - 2009
Externally published	Yes

Publication series

Name	IFAC Proceedings Volumes (IFAC-PapersOnline)
Volume	13
ISSN (Print)	1474-6670

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

Some of the results described herein and in Li and Meerkov (2009) have been obtained in collaboration with J.-T. Lim, F. Top, D. Jacobs, C.-T. Kuo, S.-Y. Chiang, and E. Enginarlar. To all of them we express our gratitude. Financial support for the research on PSE has been provided, for over 20 years, by the NSF. Without this support, the results reported herein and in Li and Meerkov (2009) would hardly be possible. In addition, this work was sponsored, both financially and through numerous applications and case studies, by GM, Ford, and Chrysler. Their contribution is impossible to overestimate.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access Output

10.3182/20090603-3-RU-2001.0580

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@inproceedings{a076fddcac8549e899d56474a8411805,

title = "Production systems engineering: Problems, solutions, and applications",

abstract = "Production Systems Engineering (PSE) is an emerging branch of Engineering intended to uncover fundamental principles of production systems and utilize them for analysis, continuous improvement, and design. In PSE, manufacturing systems are addressed based on first principles and at the same level of rigor as that in other engineering disciplines. This paper is intended to give a general characterization of PSE and consider, in some details, several PSE problems. Specifically, the problems of performance analysis, bottlenecks, leanness, system-theoretic properties, and transient behavior are addressed. In addition, several case studies are described and the PSE Toolbox, which implements the techniques and algorithms developed, is presented. {\textcopyright} 2009 IFAC.",

author = "Jingshan Li and Meerkov, \{Semyon M.\} and Liang Zhang",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "2009",

doi = "10.3182/20090603-3-RU-2001.0580",

language = "English",

isbn = "9783902661432",

volume = "13",

series = "IFAC Proceedings Volumes (IFAC-PapersOnline)",

publisher = "IFAC Secretariat",

pages = "1--14",

booktitle = "Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09",

address = "Austria",

}

Production systems engineering: Problems, solutions, and applications. / Li, Jingshan; Meerkov, Semyon M.; Zhang, Liang.
Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09. Vol. 13 IFAC Secretariat, 2009. p. 1-14 (IFAC Proceedings Volumes (IFAC-PapersOnline); Vol. 13).

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

TY - GEN

T1 - Production systems engineering

T2 - Problems, solutions, and applications

AU - Li, Jingshan

AU - Meerkov, Semyon M.

AU - Zhang, Liang

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2009

Y1 - 2009

N2 - Production Systems Engineering (PSE) is an emerging branch of Engineering intended to uncover fundamental principles of production systems and utilize them for analysis, continuous improvement, and design. In PSE, manufacturing systems are addressed based on first principles and at the same level of rigor as that in other engineering disciplines. This paper is intended to give a general characterization of PSE and consider, in some details, several PSE problems. Specifically, the problems of performance analysis, bottlenecks, leanness, system-theoretic properties, and transient behavior are addressed. In addition, several case studies are described and the PSE Toolbox, which implements the techniques and algorithms developed, is presented. © 2009 IFAC.

AB - Production Systems Engineering (PSE) is an emerging branch of Engineering intended to uncover fundamental principles of production systems and utilize them for analysis, continuous improvement, and design. In PSE, manufacturing systems are addressed based on first principles and at the same level of rigor as that in other engineering disciplines. This paper is intended to give a general characterization of PSE and consider, in some details, several PSE problems. Specifically, the problems of performance analysis, bottlenecks, leanness, system-theoretic properties, and transient behavior are addressed. In addition, several case studies are described and the PSE Toolbox, which implements the techniques and algorithms developed, is presented. © 2009 IFAC.

UR - https://www.scopus.com/pages/publications/79953652124

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-79953652124&origin=recordpage

U2 - 10.3182/20090603-3-RU-2001.0580

DO - 10.3182/20090603-3-RU-2001.0580

M3 - RGC 32 - Refereed conference paper (with host publication)

SN - 9783902661432

VL - 13

T3 - IFAC Proceedings Volumes (IFAC-PapersOnline)

SP - 1

EP - 14

BT - Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09

PB - IFAC Secretariat

ER -

Production systems engineering: Problems, solutions, and applications

Abstract

Publication series

Bibliographical note

Funding

UN SDGs

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this