Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations

C. A. Van Luttervelt; T. H.C. Childs; I. S. Jawahir; F. Klocke; P. K. Venuvinod; Y. Altintas; E. Armarego; D. Dornfeld; I. Grabec; J. Leopold; B. Lindstrom; D. Lucca; T. Obikawa; Shirakashi; H. Sato

doi:10.1016/s0007-8506(07)63244-2

Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations

C. A. Van Luttervelt
, T. H.C. Childs
, I. S. Jawahir
, F. Klocke
, P. K. Venuvinod
, Y. Altintas
, E. Armarego
, D. Dornfeld
, I. Grabec
, J. Leopold
, B. Lindstrom
, D. Lucca
, T. Obikawa
, Shirakashi
, H. Sato

City University of Hong Kong

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

341 Citations (Scopus)

Abstract

In 1995 CIRP STC "Cutting" started a working group "Modelling of Machining Operations" with the aim of stimulating the development of models capable of predicting quantitatively the performance of metal cutting operations which will be better adapted to the needs of the metal cutting industry in the future. This paper has the character of a progress report. It presents the aims of the working group and the results obtained up to now. The aim is not to review extensively what has been done in the past. It is basically a critical assessment of the present state-of-the-art of the wide and complex field of modelling and simulation of metal cutting operations based on information obtained from the members of the working group, from consultation in industry, study of relevant literature and discussions at meetings of the working group whit the aim to stimulate and pilot future developments. For this purpose much attention is given to a discussion of desirable and possible future developments and planned new activities.
Copyright © 1998 CIRP

Original language	English
Pages (from-to)	587-626
Journal	CIRP Annals - Manufacturing Technology
Volume	47
Issue number	2
DOIs	https://doi.org/10.1016/s0007-8506(07)63244-2
Publication status	Published - 1998

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

Co-operative work
Cutting
Modelling

Access Output

10.1016/s0007-8506(07)63244-2

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

Van Luttervelt, C. A., Childs, T. H. C., Jawahir, I. S., Klocke, F., Venuvinod, P. K., Altintas, Y., Armarego, E., Dornfeld, D., Grabec, I., Leopold, J., Lindstrom, B., Lucca, D., Obikawa, T., Shirakashi, & Sato, H. (1998). Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations. CIRP Annals - Manufacturing Technology, 47(2), 587-626. https://doi.org/10.1016/s0007-8506(07)63244-2

@article{92e13a011c2844dca51da5853ee3a168,

title = "Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations",

abstract = "In 1995 CIRP STC {"}Cutting{"} started a working group {"}Modelling of Machining Operations{"} with the aim of stimulating the development of models capable of predicting quantitatively the performance of metal cutting operations which will be better adapted to the needs of the metal cutting industry in the future. This paper has the character of a progress report. It presents the aims of the working group and the results obtained up to now. The aim is not to review extensively what has been done in the past. It is basically a critical assessment of the present state-of-the-art of the wide and complex field of modelling and simulation of metal cutting operations based on information obtained from the members of the working group, from consultation in industry, study of relevant literature and discussions at meetings of the working group whit the aim to stimulate and pilot future developments. For this purpose much attention is given to a discussion of desirable and possible future developments and planned new activities. Copyright {\textcopyright} 1998 CIRP",

keywords = "Co-operative work, Cutting, Modelling",

author = "\{Van Luttervelt\}, \{C. A.\} and Childs, \{T. H.C.\} and Jawahir, \{I. S.\} and F. Klocke and Venuvinod, \{P. K.\} and Y. Altintas and E. Armarego and D. Dornfeld and I. Grabec and J. Leopold and B. Lindstrom and D. Lucca and T. Obikawa and Shirakashi and H. Sato",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "1998",

doi = "10.1016/s0007-8506(07)63244-2",

language = "English",

volume = "47",

pages = "587--626",

journal = "CIRP Annals - Manufacturing Technology",

issn = "0007-8506",

publisher = "Elsevier Inc.",

number = "2",

}

Van Luttervelt, CA, Childs, THC, Jawahir, IS, Klocke, F, Venuvinod, PK, Altintas, Y, Armarego, E, Dornfeld, D, Grabec, I, Leopold, J, Lindstrom, B, Lucca, D, Obikawa, T, Shirakashi & Sato, H 1998, 'Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations', CIRP Annals - Manufacturing Technology, vol. 47, no. 2, pp. 587-626. https://doi.org/10.1016/s0007-8506(07)63244-2

Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations. / Van Luttervelt, C. A.; Childs, T. H.C.; Jawahir, I. S. et al.
In: CIRP Annals - Manufacturing Technology, Vol. 47, No. 2, 1998, p. 587-626.

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

TY - JOUR

T1 - Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations

AU - Van Luttervelt, C. A.

AU - Childs, T. H.C.

AU - Jawahir, I. S.

AU - Klocke, F.

AU - Venuvinod, P. K.

AU - Altintas, Y.

AU - Armarego, E.

AU - Dornfeld, D.

AU - Grabec, I.

AU - Leopold, J.

AU - Lindstrom, B.

AU - Lucca, D.

AU - Obikawa, T.

AU - Shirakashi, null

AU - Sato, H.

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 1998

Y1 - 1998

N2 - In 1995 CIRP STC "Cutting" started a working group "Modelling of Machining Operations" with the aim of stimulating the development of models capable of predicting quantitatively the performance of metal cutting operations which will be better adapted to the needs of the metal cutting industry in the future. This paper has the character of a progress report. It presents the aims of the working group and the results obtained up to now. The aim is not to review extensively what has been done in the past. It is basically a critical assessment of the present state-of-the-art of the wide and complex field of modelling and simulation of metal cutting operations based on information obtained from the members of the working group, from consultation in industry, study of relevant literature and discussions at meetings of the working group whit the aim to stimulate and pilot future developments. For this purpose much attention is given to a discussion of desirable and possible future developments and planned new activities. Copyright © 1998 CIRP

AB - In 1995 CIRP STC "Cutting" started a working group "Modelling of Machining Operations" with the aim of stimulating the development of models capable of predicting quantitatively the performance of metal cutting operations which will be better adapted to the needs of the metal cutting industry in the future. This paper has the character of a progress report. It presents the aims of the working group and the results obtained up to now. The aim is not to review extensively what has been done in the past. It is basically a critical assessment of the present state-of-the-art of the wide and complex field of modelling and simulation of metal cutting operations based on information obtained from the members of the working group, from consultation in industry, study of relevant literature and discussions at meetings of the working group whit the aim to stimulate and pilot future developments. For this purpose much attention is given to a discussion of desirable and possible future developments and planned new activities. Copyright © 1998 CIRP

KW - Co-operative work

KW - Cutting

KW - Modelling

UR - https://www.scopus.com/pages/publications/0032311787

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-0032311787&origin=recordpage

U2 - 10.1016/s0007-8506(07)63244-2

DO - 10.1016/s0007-8506(07)63244-2

M3 - RGC 21 - Publication in refereed journal

SN - 0007-8506

VL - 47

SP - 587

EP - 626

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

IS - 2

ER -

Present situation and future trends in modelling of machining operations progress report of the CIRP working group 'modelling of machining operations

Abstract

Bibliographical note

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this