Preparation of porous materials with ordered hole structure

Marcus Liew Kai Hoa; Meihua Lu; Yong Zhang

doi:10.1016/j.cis.2006.05.029

Preparation of porous materials with ordered hole structure

Marcus Liew Kai Hoa, Meihua Lu, Yong Zhang

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

160 Citations (Scopus)

Abstract

This review paper investigates the synthesis of porous structures with controlled hole pattern and provides an overall view of the various factors involved when synthesizing such porous materials. The following factors are discussed: 1) various methods of synthesis to produce the porous structures; 2) materials which the porous structures are made of; 3) control of the pore structure; 4) various applications of such porous materials. The materials of the porous structures and the control of the pore structure will also be discussed separately under each different method, as these two factors are closely dependent on the method of fabrication. © 2006 Elsevier B.V. All rights reserved.

Original language	English
Pages (from-to)	9-23
Journal	Advances in Colloid and Interface Science
Volume	121
Issue number	1-3
DOIs	https://doi.org/10.1016/j.cis.2006.05.029
Publication status	Published - 13 Sept 2006
Externally published	Yes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

Breath figures
Colloid
Porous
Templating

Access Output

10.1016/j.cis.2006.05.029

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{4db1be4452034e7dadeae88a5a6c6b5b,

title = "Preparation of porous materials with ordered hole structure",

abstract = "This review paper investigates the synthesis of porous structures with controlled hole pattern and provides an overall view of the various factors involved when synthesizing such porous materials. The following factors are discussed: 1) various methods of synthesis to produce the porous structures; 2) materials which the porous structures are made of; 3) control of the pore structure; 4) various applications of such porous materials. The materials of the porous structures and the control of the pore structure will also be discussed separately under each different method, as these two factors are closely dependent on the method of fabrication. {\textcopyright} 2006 Elsevier B.V. All rights reserved.",

keywords = "Breath figures, Colloid, Porous, Templating",

author = "Hoa, {Marcus Liew Kai} and Meihua Lu and Yong Zhang",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected]. ",

year = "2006",

month = sep,

day = "13",

doi = "10.1016/j.cis.2006.05.029",

language = "English",

volume = "121",

pages = "9--23",

journal = "Advances in Colloid and Interface Science",

issn = "0001-8686",

publisher = "Elsevier B.V.",

number = "1-3",

}

TY - JOUR

T1 - Preparation of porous materials with ordered hole structure

AU - Hoa, Marcus Liew Kai

AU - Lu, Meihua

AU - Zhang, Yong

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2006/9/13

Y1 - 2006/9/13

N2 - This review paper investigates the synthesis of porous structures with controlled hole pattern and provides an overall view of the various factors involved when synthesizing such porous materials. The following factors are discussed: 1) various methods of synthesis to produce the porous structures; 2) materials which the porous structures are made of; 3) control of the pore structure; 4) various applications of such porous materials. The materials of the porous structures and the control of the pore structure will also be discussed separately under each different method, as these two factors are closely dependent on the method of fabrication. © 2006 Elsevier B.V. All rights reserved.

AB - This review paper investigates the synthesis of porous structures with controlled hole pattern and provides an overall view of the various factors involved when synthesizing such porous materials. The following factors are discussed: 1) various methods of synthesis to produce the porous structures; 2) materials which the porous structures are made of; 3) control of the pore structure; 4) various applications of such porous materials. The materials of the porous structures and the control of the pore structure will also be discussed separately under each different method, as these two factors are closely dependent on the method of fabrication. © 2006 Elsevier B.V. All rights reserved.

KW - Breath figures

KW - Colloid

KW - Porous

KW - Templating

UR - http://www.scopus.com/inward/record.url?scp=33747764942&partnerID=8YFLogxK

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-33747764942&origin=recordpage

U2 - 10.1016/j.cis.2006.05.029

DO - 10.1016/j.cis.2006.05.029

M3 - RGC 21 - Publication in refereed journal

C2 - 16863642

SN - 0001-8686

VL - 121

SP - 9

EP - 23

JO - Advances in Colloid and Interface Science

JF - Advances in Colloid and Interface Science

IS - 1-3

ER -

Preparation of porous materials with ordered hole structure

Abstract

Bibliographical note

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this