Skip to main navigation Skip to search Skip to main content

Preparation of bio-based polyurethane hydroponic foams using 100% bio-polyol derived from Miscanthus through organosolv fractionation

  • Hongwei Li
  • , Bing Wang
  • , Hengfu Shui
  • , Qin Wei*
  • , Chunbao Charles Xu*
  • *Corresponding author for this work

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

Abstract

A novel bio-based polyurethane (BPU) hydroponic foam was developed by substituting up to 100% of petroleum-derived polyol with bio-polyol derived from cost-effective organosolv fractionation of Miscanthus in an acetic acid-water (9/1, v/v) mixed solvent. The optimal operating conditions for organosolv fractionation were determined to be 100 °C for 120 min with 10% H2SO4 (based on dry biomass), yielding ~38% bio-polyol and ~56% crude cellulose. The obtained bio-polyol contains a significant amount of active hydroxyl groups as determined by FTIR and 1H NMR spectra analyzes, with a hydroxyl number of 157 mg KOH/g and a low weight-average molecular weight (Mw = 1900 g/mol). All BPU foam samples were evaluated for their foaming, physical, mechanical, and morphology properties. When compared to a reference foam, all BPU foams had a high open cell content of 70–80% and a maximum water absorption capacity of ~1180%. At 10% deformation, all BPU foams had comparable compressive strengths ranging from 27 kPa to 38 kPa. SEM analysis revealed that all BPU foams, especially the 100% BPU-4 foam sample, had an average cell size of 176 µm, which was comparable to that of a reference foam (172 µm). TGA analysis indicated that these foam samples were thermally stable at temperatures up to 200 °C. This research work demonstrated that the BPU foams containing up to 100% bio-polyols, with their high open cell content and high water absorption capacity, as well as relatively low mechanical strength and good cell uniformity and thermal stability, would find hydroponic application as horticultural growing media. © 2022 Elsevier B.V.
Original languageEnglish
Article number114774
JournalIndustrial Crops and Products
Volume181
Online published21 Mar 2022
DOIs
Publication statusPublished - Jul 2022
Externally publishedYes

Funding

Support for this work was provided by Agriculture and Agri-Food Canada’s AgriScience Program through the BioMass Canada cluster led by BioFuelNet. The authors also acknowledge the financial support from Natural Sciences and Engineering Research Council of Canada (NSERC) through the Discovery Grant awarded to C. Xu. The authors would also like to express their gratitude to the Nanofabrication Facility at Western University; in particular, Dr. Todd Simpson and Tim Goldhawk, for assistance with the SEM measurements.

Research Keywords

  • Acetic acid-water mixed solvent
  • Bio-based polyurethane foams
  • Bio-polyol
  • Miscanthus
  • Organosolv fractionation

Fingerprint

Dive into the research topics of 'Preparation of bio-based polyurethane hydroponic foams using 100% bio-polyol derived from Miscanthus through organosolv fractionation'. Together they form a unique fingerprint.

Cite this