Polymer optical fibre Bragg gratings based fibre laser

H. Y. Liu; H. B. Liu; G. D. Peng; P. L. Chu

doi:10.1016/j.optcom.2006.04.026

Polymer optical fibre Bragg gratings based fibre laser

H. Y. Liu
, H. B. Liu
, G. D. Peng
, P. L. Chu

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

24 Citations (Scopus)

Abstract

For the first time the fibre laser constructed from a polymer optical fibre Bragg grating is reported. The single frequency laser with the peak power of -5 dBm and signal to noise ratio greater than 45 dB has been achieved. Further examination demonstrates the excellent characteristics of the fibre laser. First, the fibre laser can be easily tuned over 35 nm by the simple axial tension method. Second, the fibre laser has the high strain sensitivity of 1.48 pm/με with the dynamic measurement range as large as 2.37%. © 2006 Elsevier B.V. All rights reserved.

Original language	English
Pages (from-to)	132-135
Journal	Optics Communications
Volume	266
Issue number	1
DOIs	https://doi.org/10.1016/j.optcom.2006.04.026
Publication status	Published - 1 Oct 2006

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

The authors would like to thank the funding supports from Australian Research Council (DP0453313) and University of New South Wales (PS06843).

Research Keywords

Fibre laser
Polymer optical fibre
Polymer optical fibre Bragg gratings
Strain sensitivity
Tuneability

Access Output

10.1016/j.optcom.2006.04.026

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{4e31efcf542443d8999b52223d9995cc,

title = "Polymer optical fibre Bragg gratings based fibre laser",

abstract = "For the first time the fibre laser constructed from a polymer optical fibre Bragg grating is reported. The single frequency laser with the peak power of -5 dBm and signal to noise ratio greater than 45 dB has been achieved. Further examination demonstrates the excellent characteristics of the fibre laser. First, the fibre laser can be easily tuned over 35 nm by the simple axial tension method. Second, the fibre laser has the high strain sensitivity of 1.48 pm/με with the dynamic measurement range as large as 2.37\%. {\textcopyright} 2006 Elsevier B.V. All rights reserved.",

keywords = "Fibre laser, Polymer optical fibre, Polymer optical fibre Bragg gratings, Strain sensitivity, Tuneability",

author = "Liu, \{H. Y.\} and Liu, \{H. B.\} and Peng, \{G. D.\} and Chu, \{P. L.\}",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "2006",

month = oct,

day = "1",

doi = "10.1016/j.optcom.2006.04.026",

language = "English",

volume = "266",

pages = "132--135",

journal = "Optics Communications",

issn = "0030-4018",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - Polymer optical fibre Bragg gratings based fibre laser

AU - Liu, H. Y.

AU - Liu, H. B.

AU - Peng, G. D.

AU - Chu, P. L.

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2006/10/1

Y1 - 2006/10/1

N2 - For the first time the fibre laser constructed from a polymer optical fibre Bragg grating is reported. The single frequency laser with the peak power of -5 dBm and signal to noise ratio greater than 45 dB has been achieved. Further examination demonstrates the excellent characteristics of the fibre laser. First, the fibre laser can be easily tuned over 35 nm by the simple axial tension method. Second, the fibre laser has the high strain sensitivity of 1.48 pm/με with the dynamic measurement range as large as 2.37%. © 2006 Elsevier B.V. All rights reserved.

AB - For the first time the fibre laser constructed from a polymer optical fibre Bragg grating is reported. The single frequency laser with the peak power of -5 dBm and signal to noise ratio greater than 45 dB has been achieved. Further examination demonstrates the excellent characteristics of the fibre laser. First, the fibre laser can be easily tuned over 35 nm by the simple axial tension method. Second, the fibre laser has the high strain sensitivity of 1.48 pm/με with the dynamic measurement range as large as 2.37%. © 2006 Elsevier B.V. All rights reserved.

KW - Fibre laser

KW - Polymer optical fibre

KW - Polymer optical fibre Bragg gratings

KW - Strain sensitivity

KW - Tuneability

UR - https://www.scopus.com/pages/publications/33748458044

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-33748458044&origin=recordpage

U2 - 10.1016/j.optcom.2006.04.026

DO - 10.1016/j.optcom.2006.04.026

M3 - RGC 21 - Publication in refereed journal

SN - 0030-4018

VL - 266

SP - 132

EP - 135

JO - Optics Communications

JF - Optics Communications

IS - 1

ER -

Polymer optical fibre Bragg gratings based fibre laser

Abstract

Bibliographical note

Funding

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this