Optical fiber packaging by lead (Pb)-free solder in V-grooves

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

13 Scopus Citations
View graph of relations

Author(s)

Detail(s)

Original languageEnglish
Pages (from-to)1115-1119
Journal / PublicationCeramics International
Volume30
Issue number7
Publication statusPublished - 2004
Externally publishedYes

Conference

Title3rd Asian Meeting on Electroceramics
PlaceSingapore
CitySingapore
Period7 - 11 December 2003

Abstract

Etched V-grooves along the [1 1 0] direction on (0 0 1) surface of Si wafers have been used to achieve high precision alignment between fibers in opto-electronic devices by epoxy-bonding. Nevertheless, the positioning of fibers using epoxy-bonding lacks long-term stability. We developed a novel technology of using metallic solder bonding instead of the organic epoxy-bonding. The challenge is because of the fact that solder does not wet SiO2 surface. To circumvent this problem, electron-beam evaporation was used to deposit a multi-layered metallic coating on the surfaces of fibers and V-grooved chips. Three types of coatings were investigated, and they are Ti/Au, Ti/Cu/Au, and Ti/Ni/Au. These metallic film coatings have good adhesion on the fiber and the V-groove. We utilized a low melting point Pb-free solder, eutectic 43Sn57Bi (in wt.%), with a melting point of 139°C to bond an array of fibers to V-grooved chips. The mechanical and optical tests illustrated that we can achieve precision alignment of fibers by the soldering method and the bonded structure is stable at room temperature. The metallic solder bonding can be hermetic and it can isolate the optical device from ambient environment. © 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Research Area(s)

  • Lead-free solder, Optical fiber array, Optical packaging, Soldering packaging glass fiber array, V-Grooved fiber array

Bibliographic Note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to lbscholars@cityu.edu.hk.

Citation Format(s)

Optical fiber packaging by lead (Pb)-free solder in V-grooves. / Ou, Shengquan; Xu, Gu; Xu, Yuhuan; Tu, K. N.

In: Ceramics International, Vol. 30, No. 7, 2004, p. 1115-1119.

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review