Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations

Junwen Wang; Jingshan Li; Jorge Arinez; Stephan Biller; Ningjian Huang

doi:10.1109/COASE.2009.5234176

Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations

Junwen Wang, Jingshan Li, Jorge Arinez, Stephan Biller, Ningjian Huang

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

1 Citation (Scopus)

Abstract

Many flexible manufacturing systems implement batch production, in order to shorten changeover time, reduce cost, and improve quality. In such systems, different types of products are grouped into batches where all parts in each batch have the same type. The change of product type only occurs after the last job in a batch is processed. In this paper, we present an analytical method to evaluate the quality performance of flexible manufacturing systems with batch operations and investigate the monotonic and non-monotonic properties of product quality with respect to quality failure and repair probabilities and batch sizes. © 2009 IEEE.

Original language	English
Title of host publication	2009 IEEE International Conference on Automation Science and Engineering, CASE 2009
Pages	13-18
DOIs	https://doi.org/10.1109/COASE.2009.5234176
Publication status	Published - 2009
Externally published	Yes
Event	2009 IEEE International Conference on Automation Science and Engineering, CASE 2009 - Bangalore, India Duration: 22 Aug 2009 → 25 Aug 2009

Publication series

Name	2009 IEEE International Conference on Automation Science and Engineering, CASE 2009

Conference

Conference	2009 IEEE International Conference on Automation Science and Engineering, CASE 2009
Place	India
City	Bangalore
Period	22/08/09 → 25/08/09

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

This work is partially supported by NSF Grant No. CMMI-0727691 and University of Kentucky Faculty Research Grant.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Research Keywords

Batch production
Flexible manufacturing system
Markov chain
Monotonicity
Product quality

Access Output

10.1109/COASE.2009.5234176

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

Wang, J., Li, J., Arinez, J., Biller, S., & Huang, N. (2009). Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations. In 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009 (pp. 13-18). Article 5234176 (2009 IEEE International Conference on Automation Science and Engineering, CASE 2009). https://doi.org/10.1109/COASE.2009.5234176

@inproceedings{ac83551d636e4c939c690be4dfe45d50,

title = "Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations",

abstract = "Many flexible manufacturing systems implement batch production, in order to shorten changeover time, reduce cost, and improve quality. In such systems, different types of products are grouped into batches where all parts in each batch have the same type. The change of product type only occurs after the last job in a batch is processed. In this paper, we present an analytical method to evaluate the quality performance of flexible manufacturing systems with batch operations and investigate the monotonic and non-monotonic properties of product quality with respect to quality failure and repair probabilities and batch sizes. {\textcopyright} 2009 IEEE.",

keywords = "Batch production, Flexible manufacturing system, Markov chain, Monotonicity, Product quality",

author = "Junwen Wang and Jingshan Li and Jorge Arinez and Stephan Biller and Ningjian Huang",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].; 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009 ; Conference date: 22-08-2009 Through 25-08-2009",

year = "2009",

doi = "10.1109/COASE.2009.5234176",

language = "English",

isbn = "9781424445783",

series = "2009 IEEE International Conference on Automation Science and Engineering, CASE 2009",

pages = "13--18",

booktitle = "2009 IEEE International Conference on Automation Science and Engineering, CASE 2009",

}

Wang, J, Li, J, Arinez, J, Biller, S & Huang, N 2009, Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations. in 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009., 5234176, 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009, pp. 13-18, 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009, Bangalore, India, 22/08/09. https://doi.org/10.1109/COASE.2009.5234176

Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations. / Wang, Junwen; Li, Jingshan; Arinez, Jorge et al.
2009 IEEE International Conference on Automation Science and Engineering, CASE 2009. 2009. p. 13-18 5234176 (2009 IEEE International Conference on Automation Science and Engineering, CASE 2009).

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

TY - GEN

T1 - Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations

AU - Wang, Junwen

AU - Li, Jingshan

AU - Arinez, Jorge

AU - Biller, Stephan

AU - Huang, Ningjian

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2009

Y1 - 2009

N2 - Many flexible manufacturing systems implement batch production, in order to shorten changeover time, reduce cost, and improve quality. In such systems, different types of products are grouped into batches where all parts in each batch have the same type. The change of product type only occurs after the last job in a batch is processed. In this paper, we present an analytical method to evaluate the quality performance of flexible manufacturing systems with batch operations and investigate the monotonic and non-monotonic properties of product quality with respect to quality failure and repair probabilities and batch sizes. © 2009 IEEE.

AB - Many flexible manufacturing systems implement batch production, in order to shorten changeover time, reduce cost, and improve quality. In such systems, different types of products are grouped into batches where all parts in each batch have the same type. The change of product type only occurs after the last job in a batch is processed. In this paper, we present an analytical method to evaluate the quality performance of flexible manufacturing systems with batch operations and investigate the monotonic and non-monotonic properties of product quality with respect to quality failure and repair probabilities and batch sizes. © 2009 IEEE.

KW - Batch production

KW - Flexible manufacturing system

KW - Markov chain

KW - Monotonicity

KW - Product quality

UR - http://www.scopus.com/inward/record.url?scp=70449111595&partnerID=8YFLogxK

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-70449111595&origin=recordpage

U2 - 10.1109/COASE.2009.5234176

DO - 10.1109/COASE.2009.5234176

M3 - RGC 32 - Refereed conference paper (with host publication)

SN - 9781424445783

T3 - 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009

SP - 13

EP - 18

BT - 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009

T2 - 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009

Y2 - 22 August 2009 through 25 August 2009

ER -

Wang J, Li J, Arinez J, Biller S, Huang N. Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations. In 2009 IEEE International Conference on Automation Science and Engineering, CASE 2009. 2009. p. 13-18. 5234176. (2009 IEEE International Conference on Automation Science and Engineering, CASE 2009). doi: 10.1109/COASE.2009.5234176

Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations

Abstract

Publication series

Conference

Bibliographical note

Funding

UN SDGs

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this