Skip to main navigation Skip to search Skip to main content

Microstructure and mechanical properties of Ag-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Abstract

    Seven diamonds-like carbon (Ag-DLC) films with different Ag contents were deposited on (1 0 0) Si substrate in a mid-frequency dual-magnetron system. Studies were performed to investigate the influence of the Ag content and nanograin size on the microstructure and mechanical properties of the films. Results showed: (i) the dispersion of Ag nanocrystallites within the amorphous DLC matrix, and the tendency for the size of the Ag nanocrystallite to increase with the Ag content; (ii) the exhibition of higher hardness, lower intrinsic stress and better adhesion for the films with Ag content ranging between 7.4 and 12.5 at% when compared with the films of Ag content in range of 16.8-24.7 at%; and (iii) the achievement of the best mechanical properties for the film deposited with 9.6 at% Ag. © 2009 Elsevier B.V. All rights reserved.
    Original languageEnglish
    Pages (from-to)1431-1435
    JournalApplied Surface Science
    Volume256
    Issue number5
    DOIs
    Publication statusPublished - 15 Dec 2009

    Research Keywords

    • Ag content
    • Ag-containing diamond-like carbon film
    • Mechanical behavior
    • Microstructure

    Fingerprint

    Dive into the research topics of 'Microstructure and mechanical properties of Ag-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering'. Together they form a unique fingerprint.

    Cite this