Skip to main navigation Skip to search Skip to main content

MEMS-based Humidity Sensors with Integrated Temperature Sensors for Signal Drift Compensation

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

Abstract

Humidity sensing is essential in such fields as environmental control, process monitoring and biomedical analysis. A microfabricated humidity sensor is developed which uses a nitride/silicon microstructure suspended at a small distance above the surface of a glass substrate as the movable electrode of a capacitor and thin-film platinum resistors as temperature sensing elements. The suspending structure is coated with polyimide - a vapor-absorbent polymer film. Moisture-dependent bending of the micro-cantilever is caused by the variation of humidity. The measured capacitance between the micro suspending structure and the substrate is changed. The humidity sensor is integrated with a platinum resistor as a micro temperature detector for compensation of the capacitance signal drift caused by temperature. A low hysteresis value is indicated at high relative humidity. Because of the large electrode area on the microcantilever tip and the low stiffness of the microcantilever, a high degree of sensitivity is also attained. The relative humidity and calibrated capacitance/resistance is documented and both of the simulated and experimental samples indicate a high stability and a high degree of linearity. The average time constant of the proposed microcantilever-based humidity sensors is 1.10 sec in the relative humidity range of 20 %R.H. to 40%R.H.
Original languageEnglish
Title of host publicationProceedings of IEEE Sensors
Pages384-388
Volume2
DOIs
Publication statusPublished - 2003
Externally publishedYes
EventSecond International Conference on Sensors: IEEE Sensors 2003 - Toronto, Ont., Canada
Duration: 22 Oct 2003 → 24 Oct 2003

Conference

ConferenceSecond International Conference on Sensors: IEEE Sensors 2003
PlaceCanada
CityToronto, Ont.
Period22/10/03 → 24/10/03

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Research Keywords

  • Humidity sensor
  • MEMS
  • Microcantilever
  • Polyimide
  • Temperature sensor

Fingerprint

Dive into the research topics of 'MEMS-based Humidity Sensors with Integrated Temperature Sensors for Signal Drift Compensation'. Together they form a unique fingerprint.

Cite this