Manganese-modified BiScO 3-PbTiO 3 piezoelectric ceramic for high-temperature shear mode sensor

Shujun Zhang; Richard E. Eitel; Clive A. Randall; Thomas R. Shrout; Edward F. Alberta

doi:10.1063/1.1968419

Manganese-modified BiScO ₃-PbTiO ₃ piezoelectric ceramic for high-temperature shear mode sensor

Shujun Zhang
, Richard E. Eitel
, Clive A. Randall
, Thomas R. Shrout
, Edward F. Alberta

Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

208 Citations (Scopus)

Abstract

The bismuth-based perovskite solid solution (100-x) BiSc O3 -xPbTi O3 (BSPT) was investigated for use at temperatures up to 400 °C and above. The high-temperature resistivity, together with dielectric and piezoelectric behaviors of the shear mode for manganese-modified BSPT ceramics near the morphotropic phase boundary composition were studied. The resistivity and time constant were found to be 3× 107 Ω cm and 0.08 s, respectively, at 450 °C for modified BSPT66. The dielectric constant Κ11T and dielectric loss were found to be 1112 and 1%, respectively, at room temperature, showing a Curie temperature at 468 °C. The electromechanical coupling factor k15 was calculated to be 61%, staying nearly constant up to 440 °C, expanding the temperature usage range significantly. The properties indicate that the modified BSPT66 material is a promising candidate for high-temperature shear sensor applications. © 2005 American Institute of Physics.

Original language	English
Article number	262904
Pages (from-to)	1-3
Journal	Applied Physics Letters
Volume	86
Issue number	26
DOIs	https://doi.org/10.1063/1.1968419
Publication status	Published - 27 Jun 2005
Externally published	Yes

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

This work is supported by NIH under Grant No. P41-RR 11795 and ONR, DARPA.

Access Output

10.1063/1.1968419

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@article{1ce5c96b9ad3483d836bcf977f454361,

title = "Manganese-modified BiScO 3-PbTiO 3 piezoelectric ceramic for high-temperature shear mode sensor",

abstract = "The bismuth-based perovskite solid solution (100-x) BiSc O3 -xPbTi O3 (BSPT) was investigated for use at temperatures up to 400 °C and above. The high-temperature resistivity, together with dielectric and piezoelectric behaviors of the shear mode for manganese-modified BSPT ceramics near the morphotropic phase boundary composition were studied. The resistivity and time constant were found to be 3× 107 Ω cm and 0.08 s, respectively, at 450 °C for modified BSPT66. The dielectric constant Κ11T and dielectric loss were found to be 1112 and 1\%, respectively, at room temperature, showing a Curie temperature at 468 °C. The electromechanical coupling factor k15 was calculated to be 61\%, staying nearly constant up to 440 °C, expanding the temperature usage range significantly. The properties indicate that the modified BSPT66 material is a promising candidate for high-temperature shear sensor applications. {\textcopyright} 2005 American Institute of Physics.",

author = "Shujun Zhang and Eitel, \{Richard E.\} and Randall, \{Clive A.\} and Shrout, \{Thomas R.\} and Alberta, \{Edward F.\}",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "2005",

month = jun,

day = "27",

doi = "10.1063/1.1968419",

language = "English",

volume = "86",

pages = "1--3",

journal = "Applied Physics Letters",

issn = "0003-6951",

publisher = "American Institute of Physics",

number = "26",

}

TY - JOUR

T1 - Manganese-modified BiScO 3-PbTiO 3 piezoelectric ceramic for high-temperature shear mode sensor

AU - Zhang, Shujun

AU - Eitel, Richard E.

AU - Randall, Clive A.

AU - Shrout, Thomas R.

AU - Alberta, Edward F.

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2005/6/27

Y1 - 2005/6/27

N2 - The bismuth-based perovskite solid solution (100-x) BiSc O3 -xPbTi O3 (BSPT) was investigated for use at temperatures up to 400 °C and above. The high-temperature resistivity, together with dielectric and piezoelectric behaviors of the shear mode for manganese-modified BSPT ceramics near the morphotropic phase boundary composition were studied. The resistivity and time constant were found to be 3× 107 Ω cm and 0.08 s, respectively, at 450 °C for modified BSPT66. The dielectric constant Κ11T and dielectric loss were found to be 1112 and 1%, respectively, at room temperature, showing a Curie temperature at 468 °C. The electromechanical coupling factor k15 was calculated to be 61%, staying nearly constant up to 440 °C, expanding the temperature usage range significantly. The properties indicate that the modified BSPT66 material is a promising candidate for high-temperature shear sensor applications. © 2005 American Institute of Physics.

AB - The bismuth-based perovskite solid solution (100-x) BiSc O3 -xPbTi O3 (BSPT) was investigated for use at temperatures up to 400 °C and above. The high-temperature resistivity, together with dielectric and piezoelectric behaviors of the shear mode for manganese-modified BSPT ceramics near the morphotropic phase boundary composition were studied. The resistivity and time constant were found to be 3× 107 Ω cm and 0.08 s, respectively, at 450 °C for modified BSPT66. The dielectric constant Κ11T and dielectric loss were found to be 1112 and 1%, respectively, at room temperature, showing a Curie temperature at 468 °C. The electromechanical coupling factor k15 was calculated to be 61%, staying nearly constant up to 440 °C, expanding the temperature usage range significantly. The properties indicate that the modified BSPT66 material is a promising candidate for high-temperature shear sensor applications. © 2005 American Institute of Physics.

UR - https://www.scopus.com/pages/publications/22144481667

UR - https://www.scopus.com/pages/publications/22144481667#tab=impact

U2 - 10.1063/1.1968419

DO - 10.1063/1.1968419

M3 - RGC 21 - Publication in refereed journal

SN - 0003-6951

VL - 86

SP - 1

EP - 3

JO - Applied Physics Letters

JF - Applied Physics Letters

IS - 26

M1 - 262904

ER -