High-rate and long-life performance of a truncated spinel cathode material with off-stoichiometric composition at elevated temperature

Research output: Journal Publications and ReviewsRGC 21 - Publication in refereed journalpeer-review

39 Scopus Citations
View graph of relations

Author(s)

  • Chunxiang Yang
  • Yuanfu Deng
  • Man Gao
  • Xianfeng Yang
  • Xusong Qin

Detail(s)

Original languageEnglish
Pages (from-to)198-206
Journal / PublicationElectrochimica Acta
Volume225
Publication statusPublished - 20 Jan 2017
Externally publishedYes

Abstract

A truncated octahedral structure spinel cathode material with a nominal composition of Li1.08Al0.08Mn1.85Co0.05O3.9F0.1 (LAMCOF) and an Al-rich surface layer is successfully prepared by a sol-gel route combined with a temperature-controlled heat-treatment process. Concentration gradient of Mn4+ ions is found to decrease through the surface to the interior of the as-prepared sample. As the consequence, the LAMCOF sample delivers high rate capability and excellent cycling stability at elevated temperature, showing an initial discharge capacity of 111.1 mAh g−1 and capacity retention of 70.5% over 850 cycles at 1C rate under 55 °C. Even at 5C rate under 55 °C, it also displays a high capacity of 102.5 mAh g−1 with capacity retention of 80.0% over 850 cycles. These results reveal the importance of an off-stoichiometric strategy and a temperature-controlled heat-treatment process for the preparation of LiMn2O4-based spinel cathode material with unique crystal orientation and Mn4+-rich surface layer, which both decrease the Mn dissolution and provide interfacial stability while preserving fast Li+ diffusion, resulting in improvement of cycle performance and rate capability of the as-prepared material. This proposed synthesis method does not need a supplementary coating process and is likely suitable to prepare other high performance cathode materials.

Research Area(s)

  • Cathode, High capacity retention, LiMn2O4, Off-stoichiometric strategy, Spinel

Bibliographic Note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Citation Format(s)