TY - GEN
T1 - Experimental investigation of bubble departure diameter and bubble departure frequency in subcooled flow boiling in a vertical annulus
AU - Brooks, Caleb S.
AU - Silin, Nicolás
AU - Hibiki, Takashi
AU - Ishii, Mamoru
N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].
PY - 2013
Y1 - 2013
N2 - Wall nucleation experiments have been performed in a vertical annulus test section for investigation of the bubble departure diameter and bubble departure frequency. The experimental data in forced convective subcooled boiling flow is presented as a parametric study of the effect of wall heat flux, local bulk liquid sub-cooling, liquid flow rate, and system pressure. The data is shown to extend the database currently available in literature to a wider range of system conditions. Along with the current database in forced convective flow, the available models for bubble departure size and frequency are reviewed and compared with the new data. The prediction of the bubble departure frequency is shown to require accurate modeling of the bubble departure diameter which has poor agreement with the experimental database. Copyright © 2013 by ASME.
AB - Wall nucleation experiments have been performed in a vertical annulus test section for investigation of the bubble departure diameter and bubble departure frequency. The experimental data in forced convective subcooled boiling flow is presented as a parametric study of the effect of wall heat flux, local bulk liquid sub-cooling, liquid flow rate, and system pressure. The data is shown to extend the database currently available in literature to a wider range of system conditions. Along with the current database in forced convective flow, the available models for bubble departure size and frequency are reviewed and compared with the new data. The prediction of the bubble departure frequency is shown to require accurate modeling of the bubble departure diameter which has poor agreement with the experimental database. Copyright © 2013 by ASME.
UR - https://www.scopus.com/pages/publications/84892971043
UR - https://www.scopus.com/pages/publications/84892971043#tab=impact
U2 - 10.1115/HT2013-17308
DO - 10.1115/HT2013-17308
M3 - RGC 32 - Refereed conference paper (with host publication)
SN - 9780791855485
VL - 2
T3 - ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013
BT - ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013
T2 - ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology
Y2 - 14 July 2013 through 19 July 2013
ER -