Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform

X. Liu; S. Y.R. Hui

doi:10.1109/APEC.2005.1453187

Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform

X. Liu
, S. Y.R. Hui

Department of Electrical Engineering

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

4 Citations (Scopus)

Abstract

In this paper, an equivalent circuit model of a multilayer planar winding array structure that can be used as a universal contactless battery charging platform is presented. This model includes the mutual-inductive effects of partial overlaps of planar windings in the multi-layer structure. It has been successfully simulated with PSpice and practically verified with measurements obtained from three prototypes. This circuit model forms the basis of an overall system model of the planar charging platform. It is demonstrated that model parameters can be derived from the geometry of the winding structure. Errors between the calculated and the measured results are found to be within a tolerance of 5%. © 2005 IEEE.

Original language	English
Title of host publication	Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005
Pages	1366-1372
Volume	2
DOIs	https://doi.org/10.1109/APEC.2005.1453187
Publication status	Published - 2005
Event	20th Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005 - Austin, TX, United States Duration: 6 Mar 2005 → 10 Mar 2005

Publication series

Name	Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC
Volume	2

Conference

Conference	20th Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005
Place	United States
City	Austin, TX
Period	6/03/05 → 10/03/05

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

This work was supported by the Hong Kong Research Grant Council under Project CityU 1223/03E and by the City University of Hong Kong

Research Keywords

Battery charger
Equivalent circuit model
Planar spiral inductance
Power loss

RGC Funding Information

RGC-funded

Access Output

10.1109/APEC.2005.1453187

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

Liu, X., & Hui, S. Y. R. (2005). Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform. In Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005 (Vol. 2, pp. 1366-1372). Article 1453187 (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC; Vol. 2). https://doi.org/10.1109/APEC.2005.1453187

@inproceedings{ce7f17cde2b148f29a8615eb242a50c6,

title = "Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform",

abstract = "In this paper, an equivalent circuit model of a multilayer planar winding array structure that can be used as a universal contactless battery charging platform is presented. This model includes the mutual-inductive effects of partial overlaps of planar windings in the multi-layer structure. It has been successfully simulated with PSpice and practically verified with measurements obtained from three prototypes. This circuit model forms the basis of an overall system model of the planar charging platform. It is demonstrated that model parameters can be derived from the geometry of the winding structure. Errors between the calculated and the measured results are found to be within a tolerance of 5\%. {\textcopyright} 2005 IEEE.",

keywords = "Battery charger, Equivalent circuit model, Planar spiral inductance, Power loss",

author = "X. Liu and Hui, \{S. Y.R.\}",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].; 20th Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005 ; Conference date: 06-03-2005 Through 10-03-2005",

year = "2005",

doi = "10.1109/APEC.2005.1453187",

language = "English",

isbn = "0780389751",

volume = "2",

series = "Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC",

pages = "1366--1372",

booktitle = "Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005",

}

Liu, X & Hui, SYR 2005, Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform. in Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005. vol. 2, 1453187, Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, vol. 2, pp. 1366-1372, 20th Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005, Austin, TX, United States, 6/03/05. https://doi.org/10.1109/APEC.2005.1453187

Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform. / Liu, X.; Hui, S. Y.R.
Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005. Vol. 2 2005. p. 1366-1372 1453187 (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC; Vol. 2).

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

TY - GEN

T1 - Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform

AU - Liu, X.

AU - Hui, S. Y.R.

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2005

Y1 - 2005

N2 - In this paper, an equivalent circuit model of a multilayer planar winding array structure that can be used as a universal contactless battery charging platform is presented. This model includes the mutual-inductive effects of partial overlaps of planar windings in the multi-layer structure. It has been successfully simulated with PSpice and practically verified with measurements obtained from three prototypes. This circuit model forms the basis of an overall system model of the planar charging platform. It is demonstrated that model parameters can be derived from the geometry of the winding structure. Errors between the calculated and the measured results are found to be within a tolerance of 5%. © 2005 IEEE.

AB - In this paper, an equivalent circuit model of a multilayer planar winding array structure that can be used as a universal contactless battery charging platform is presented. This model includes the mutual-inductive effects of partial overlaps of planar windings in the multi-layer structure. It has been successfully simulated with PSpice and practically verified with measurements obtained from three prototypes. This circuit model forms the basis of an overall system model of the planar charging platform. It is demonstrated that model parameters can be derived from the geometry of the winding structure. Errors between the calculated and the measured results are found to be within a tolerance of 5%. © 2005 IEEE.

KW - Battery charger

KW - Equivalent circuit model

KW - Planar spiral inductance

KW - Power loss

UR - https://www.scopus.com/pages/publications/33744998989

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-33744998989&origin=recordpage

U2 - 10.1109/APEC.2005.1453187

DO - 10.1109/APEC.2005.1453187

M3 - RGC 32 - Refereed conference paper (with host publication)

SN - 0780389751

SN - 9780780389755

VL - 2

T3 - Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC

SP - 1366

EP - 1372

BT - Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005

T2 - 20th Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005

Y2 - 6 March 2005 through 10 March 2005

ER -

Liu X, Hui SYR. Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform. In Twentieth Annual IEEEApplied Power ElectronicsConference and Exposition, APEC 2005. Vol. 2. 2005. p. 1366-1372. 1453187. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC). doi: 10.1109/APEC.2005.1453187

Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform

Abstract

Publication series

Conference

Bibliographical note

Funding

Research Keywords

RGC Funding Information

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this