Enhanced performance of PTB7: PC₇₁BM solar cells via different morphologies of gold nanoparticles

The effects of gold nanoparticles (AuNPs) incorporated in the hole transporting layer (HTL) of poly[[4,8-bis[(2-ethylhexyl)oxy] benzo[1,2-b:4,5-b′] dithiophene-2, 6-diyl] [3-fluoro-2-[(2-ethylhexy)carbonyl]thieno[3,4-b]thiophened iyl]] (PTB7): [6,6]-phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) based solar cells are being systematically investigated in terms of the optical properties, electrical properties, and photovoltaic performance. The impacts of AuNPs on the optical response of the devices are modeled by finite-difference time-domain (FDTD) simulation. The size of the AuNPs used in this work is around 50-70 nm, so that 10-20 nm penetrated from the HTL into the active layer. We found that the power conversion efficiencies (PCEs) of the devices with AuNPs are significantly enhanced from 7.5%, for the control device, to 8.0%, 8.1%, and 8.2% for Au nanosphere-, nanorod-, and nanocube-incorporated devices, respectively. Among the photovoltaic parameters of the AuNP devices, the short circuit current density (J_SC) exhibits the largest improvement, which can be attributed to the improved optical properties of the devices. On the basis of the calculation results, the scattering cross section for the samples in the presence of AuNPs can be enhanced by a factor of ∼10¹⁰-10¹³ and Au nanocubes exhibit superior scattering cross section compared to the Au nanospheres and nanorods with the same linear dimension. From the experimental impedance spectroscopy results, we found that the addition of AuNPs had little effect on the electrical properties of the device. The device performance is also found to be sensitive to the concentration and morphology of the AuNPs.