Abstract
A cooling water system requires a large amount of power to send water to coolers installed at high platform. In spite of pressure drop, most power is not consumed, but turns to potential energy. The potential energy will turn back to pressure once cooling water goes down from high, but the pressure is wasted in current cooling water system. In this work, hydro turbines are used to recover surplus pressure. In comparison with Main-Auxiliary pump structure that is used to reduce pressure head of main pump, a new superstructure contains Main-Auxiliary pump structure and Main-Branch hydro turbine structure is proposed. The hydro turbines can be installed on the main pipeline to recover surplus pressure turned from potential energy, or on branch pipeline to recover surplus pressure provided by auxiliary pump, and to balance pressure between parallel branches. MINLP algorithm is employed to optimize pump network and hydro turbine network simultaneously. The results show that hydro turbine has greater energy saving potential than auxiliary pump. Structure with Main-Auxiliary pump and Main-Branch hydro turbine is the most energy saving and cost saving configuration. Two case studies demonstrated that the optimal structures save up to 28.2% and 31.7% of the total annual cost, and save 36.8% and 39.1% of the total energy consumption. © 2017
| Original language | English |
|---|---|
| Pages (from-to) | 329-340 |
| Journal | Energy |
| Volume | 139 |
| DOIs | |
| Publication status | Published - 2017 |
| Externally published | Yes |
Bibliographical note
Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].Research Keywords
- Cooling water system
- Energy recover
- Hydro turbine
- MINLP
- Pump network
