Electrospun nanofiber membranes incorporating fluorosilane-coated TiO2 nanocomposite for direct contact membrane distillation

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journal

80 Scopus Citations
View graph of relations


Related Research Unit(s)


Original languageEnglish
Pages (from-to)145-154
Journal / PublicationJournal of Membrane Science
Online published13 Jul 2016
Publication statusPublished - 15 Dec 2016


The electrospinning technique as a method for fabricating hydrophobic membranes for membrane distillation (MD) has received much attention in recent times. In this study, TiO2 functionalized with 1H,1H,2H,2H-perfluorooctyltriethoxysilane was added directly to the dope solution for electrospinning in order to increase the hydrophobicity of the resulting MD membranes. Three concentrations (10%, 15% and 20%) of polyvinylidene fluoride-co-hexafluoropropylene (PH) dope solution were used for electrospinning with various amounts of TiO2 (1%, 5% and 10%) to generate nanofibers. The electrospun nanofiber membrane (ENM) of 20% PH with 10% TiO2 exhibited the highest surface hydrophobicity (contact angle=149°) resulting from good dispersion of the TiO2 particles, while the highest liquid entry pressure of 194.5 kPa was observed for the ENM comprising 10% PH with 10% TiO2 due to its reduced pore sizes. Furthermore, the ENMs containing 10% TiO2 exhibited better flux and stable salt rejection than commercial and ENMs without TiO2. Notably, there was no severe wetting in the 20% PH ENM with 10% TiO2 over seven days of operation, despite the high salt concentration (7.0 wt% NaCl) of the feed water.

Research Area(s)

  • Electrospinning, Electrospun nanofiber membrane, Membrane distillation, Superhydrophobicity, Titanium dioxide

Citation Format(s)