Effects of Cu and Nb on martensite hardening and transformation-induced plastic deformation behavior of maraging TRIP-aided steel

Martensite hardening and transformation-induced plastic deformation (TRIP) are crucial to the mechanical properties of steels. In this study, maraging TRIP-aided steel was developed. The addition of Cu and Nb can effectively promote transformation-induced plastic deformation, this is due to the characteristic of the alternating combination of soft and hard phases. In contrast, the addition of Nb has a more significant effect on martensite hardening, which can be attributed to the smaller effect of Nb on the martensite transformation start temperature (M_s). The multi-phase structure and precipitation strengthening, lead to the ultimate tensile strength and elongation of the maraging TRIP-aided steel is ∼1300 MPa and ∼24%, respectively. It was found that the prior austenite formed a continuous network surrounding bainite and martensite. The high-density dislocations in bainite and martensite increased the hardness. In addition, the metastable austenite phase was transformed into the martensite phase, and a heterostructure with the alternating distribution of bainite/austenite was formed during deformation. The refinement of grains effectively reduced the concentration of stress. Massive nanometer-scaled precipitates were formed in Nb-containing steel after peak aging, and the co-precipitation of Nb-rich and Mo-rich phases occurred in the steel. The large-sized Laves-Fe₂(Nb, Mo) effectively enhanced the strength of steel, and the fine and dense Ni₃Ti was beneficial to the simultaneous improvement of strength and plasticity. Therefore, the jointed mechanisms of martensite hardening, and the TRIP effect improved the strength while retaining good plasticity. © 2023 The Authors.