Effect of 9 wt.% in addition to Sn3.5Ag0.5Cu solder on the interfacial reaction with the Au/NiP metallization on Cu pads

Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journal

31 Scopus Citations
View graph of relations

Author(s)

Related Research Unit(s)

Detail(s)

Original languageEnglish
Pages (from-to)217-223
Journal / PublicationJournal of Alloys and Compounds
Volume396
Issue number1-2
Publication statusPublished - 21 Jun 2005

Abstract

Sn-based lead-free solders have a high melting temperature, which often cause excessive interfacial reactions at the interface. A small amount of In is added to reduce the melting temperature and to change the intermetallic compound (IMC) phases. Sn3.5Ag0.5Cu and Sn3.5Ag0.5Cu9In lead-free solder alloys have been used to identify its interfacial reactions with 2-metal layer flexible substrates. In this paper we investigate the effect of 9 at.% In addition to Sn3.5Ag0.5Cu solder during extended reflow. During reflow, Au diffuses rapidly in the molten SnAgCu solder and forms AuSn4 IMC but in the case of In-containing solder, InSnAu IMCs form and are uniformly distributed in the solder. Some InSnAu IMCs have been entrapped in the SnCuNiIn quaternary intermetallic compounds (QIMCs) due to lower diffusion rate of Au in the In-containing solder. Initially SnCuNi ternary intermetallic compounds (TIMCs) and SnCuNiIn QIMCs form at the interface, which have higher growth rate and consume more of the NiP layer. Low-Cu QIMCs are found in the In-containing solder after 30 min reflow which are more stable in the P-rich Ni layer and significantly reduce the dissolution rate of the NiP layer. The spalling of SnCuNi TIMCs in the SnAgCu solder increases the diffusion rate of Sn atoms and as a consequence both the TIMCs growth rate and dissolution rate of the NiP layer also increases. In-containing solder have lower growth rate of the QIMCs and lower dissolution rate of the NiP layer than the SnAgCu solder. Consumption of the NiP layer can be reduced by adding In, because of the formation of QIMCs at the interface, QIMCs are stable and are well adhering to the P-rich Ni layer during reflow. © 2004 Elsevier B.V. All rights reserved.

Research Area(s)

  • Dissolution of electroless NiP, Effect of In, Intermetallics, Lead-free solder, SnAgCu

Citation Format(s)