Droplet formation utilizing controllable moving-wall structures for double-emulsion applications

The formation of microscale single- and double-emulsion droplets with various sizes is crucial for a variety of industrial applications. In this paper, we report a new microfluidic device which can actively fine-tune the size of single- and double-emulsion droplets in liquids by utilizing controllable movingwall structures. Moreover, various sizes of external and internal droplets for double emulsions are also successfully formed by using this device. Three pneumatic side chambers are placed at a T-junction and flow-focusing channels to construct the controllable moving-wall structures. When compressed air is applied to the pneumatic side chambers, the controllable moving-wall structures are activated, thus physically changing the width of the microchannels. The size of the internal droplets at the intersection of the T-junction channel is then fine-tuned due to the increase in the shear force. Then, the internal droplets are focused into a narrow stream hydrodynamically and finally chopped into double-emulsion droplets using another pair of moving-wall structures downstream. For single emulsions, oil-in-water droplets can be actively fine-tuned from 50.07 to 21.80 μm under applied air pressures from 10 to 25 psi with a variation of less than 3.53%. For a water-in-oil single emulsion, droplets range from 50.32 to 14.76 μm with a variation of less than 4.62% under the same applied air pressures. For double emulsions, the sizes of the external and internal droplets can be fine-tuned with external/internal droplet diameter ratios ranging from 1.69 to 2.75. The development of this microfluidic device is promising for a variety of applications in the pharmaceutical, cosmetics, and food industries. © 2008 IEEE.