Design and Analysis of EMIT Filter and Diplexer
Related Research Unit(s)
|Journal / Publication||IEEE Transactions on Industrial Electronics|
|Online published||29 Nov 2016|
|Publication status||Published - Apr 2017|
|Link to Scopus||https://www.scopus.com/record/display.uri?eid=2-s2.0-85015265737&origin=recordpage|
In this paper, a novel design of an E-plane waveguide filter, called electromagnetically induced transparency (EMIT) filter, is proposed. This EMIT filter is implemented by a rectangular ring (RR) on one side of the substrate and two strip lines resonators (SLRs) on the opposite side, which brings in electrically induced transparency and magnetically induced transparency by the electrical and magnetic couplings between the RR and SLRs, respectively. An equivalent circuit is developed further. Properties of high selectivity, low insertion loss, flat group delay, and small size of only about 0.2λg are realized by this design method. A sample has been fabricated and tested. The measured central frequency is 33.77 GHz with 3-dB fractional bandwidth of 9.4% and the minimum insertion loss in the passband is 0.5 dB. Using the proposed miniature EMIT filter, a diplexer is further designed with compact sizes and low insertion losses. The measured minimum insertion losses are 0.9 and 0.5 dB in the lower and upper passbands centered at 31.79 and 34.74 GHz with 3-dB relative bandwidths of 7.2% and 8.6%, respectively. Good agreements between the simulated and measured results are obtained both in the EMIT filter and the EMIT diplexer.
- Compact diplexer, electric and magnetic resonances, electromagnetically induced transparency (EMIT), EMIT filter, waveguide filter
IEEE Transactions on Industrial Electronics, Vol. 64, No. 4, 7762166, 04.2017, p. 3059-3066.
Research output: Journal Publications and Reviews (RGC: 21, 22, 62) › 21_Publication in refereed journal › peer-review