Corrigendum to “Strengthening and deformation mechanism of a Fe₂₀Co₂₀Cr₂₀Mn₂₀Ni₂₀ high entropy alloy with high nitrogen content” [J. Alloy.  Compd. 871 (2021) 159587]

The authors regret that the printed version of the above article contained a number of errors. The correct and final version follows. The authors would like to apologize for any inconvenience caused. There are two minor errors that are needed correction: 1. Lattice parameters of CA in Table 2 should be changed from “0.3585″to “0.3586″.2. Expansion value of Ref. [10] in Table 3 should be changed from “0.417 (for 1 at% N), 0.148 (for 3 at% N)” to “0.497 (for 0.84 at% N), 0.142 (for 3.13 at% N)”. Associated sentence in Section 3.1, paragraph 2, line 12–14 should be modified as follow: "However, Astafurova et al. [10] found that lattice expansion of 3.13 at% N cantor alloy drops to 0.142% (before: 0.148) per at% N". Reference [10] E.G. Astafurova, K.A. Reunova, E.V. Melnikov, M. Yu., Panchenko, S.V. Astafurov, G.G. Maier, V.A. Moskvina, On the difference in carbon- and nitrogen-alloying of equiatomic FeMnCrNiCo high-entropy alloy, Mater. Lett. 276 (2020), Article ID: 128183. The changes above would not affect any of the trend, deduction or conclusion. The authors apologize for any inconvenience caused.