Boundary control of PFC using state-energy plane

Ting-Ting Song; Henry S. H. Chung

doi:10.1109/PESC.2006.1712273

Boundary control of PFC using state-energy plane

Department of Electrical Engineering

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

3 Citations (Scopus)

Abstract

A new concept of boundary control of PFCs will be presented in this paper. Instead of the state plane, a state-energy plane is used to derive the switching surface for dictating the switching instants. The converter has good output regulation, as well as good dynamic behaviors. The converter can revert to the steady state in two switching actions during the external disturbances. Parametric variation of the component is compensated automatically. Of particular importance, the controller is applicable for the PFC operating in continuous conduction mode, critical conduction mode, and discontinuous conduction mode. Theoretical predictions are verified with the experimental results of a 1kW prototype.

Original language	English
Title of host publication	PESC Record - IEEE Annual Power Electronics Specialists Conference
DOIs	https://doi.org/10.1109/PESC.2006.1712273
Publication status	Published - 2006
Event	37th IEEE Power Electronics Specialists Conference 2006, PESC'06 - Jeju, Korea, Republic of Duration: 18 Jun 2006 → 22 Jun 2006

Publication series

Name
ISSN (Print)	0275-9306

Conference

Conference	37th IEEE Power Electronics Specialists Conference 2006, PESC'06
Place	Korea, Republic of
City	Jeju
Period	18/06/06 → 22/06/06

Research Keywords

Ac/dc conversion
Boundary control
Power factor corrector

Access Output

10.1109/PESC.2006.1712273

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@inproceedings{06094ffaf5624d2c815e2cb30e459505,

title = "Boundary control of PFC using state-energy plane",

abstract = "A new concept of boundary control of PFCs will be presented in this paper. Instead of the state plane, a state-energy plane is used to derive the switching surface for dictating the switching instants. The converter has good output regulation, as well as good dynamic behaviors. The converter can revert to the steady state in two switching actions during the external disturbances. Parametric variation of the component is compensated automatically. Of particular importance, the controller is applicable for the PFC operating in continuous conduction mode, critical conduction mode, and discontinuous conduction mode. Theoretical predictions are verified with the experimental results of a 1kW prototype.",

keywords = "Ac/dc conversion, Boundary control, Power factor corrector",

author = "Ting-Ting Song and Chung, {Henry S. H.}",

year = "2006",

doi = "10.1109/PESC.2006.1712273",

language = "English",

isbn = "0780397169",

booktitle = "PESC Record - IEEE Annual Power Electronics Specialists Conference",

note = "37th IEEE Power Electronics Specialists Conference 2006, PESC'06 ; Conference date: 18-06-2006 Through 22-06-2006",

}

TY - GEN

T1 - Boundary control of PFC using state-energy plane

AU - Song, Ting-Ting

AU - Chung, Henry S. H.

PY - 2006

Y1 - 2006

N2 - A new concept of boundary control of PFCs will be presented in this paper. Instead of the state plane, a state-energy plane is used to derive the switching surface for dictating the switching instants. The converter has good output regulation, as well as good dynamic behaviors. The converter can revert to the steady state in two switching actions during the external disturbances. Parametric variation of the component is compensated automatically. Of particular importance, the controller is applicable for the PFC operating in continuous conduction mode, critical conduction mode, and discontinuous conduction mode. Theoretical predictions are verified with the experimental results of a 1kW prototype.

AB - A new concept of boundary control of PFCs will be presented in this paper. Instead of the state plane, a state-energy plane is used to derive the switching surface for dictating the switching instants. The converter has good output regulation, as well as good dynamic behaviors. The converter can revert to the steady state in two switching actions during the external disturbances. Parametric variation of the component is compensated automatically. Of particular importance, the controller is applicable for the PFC operating in continuous conduction mode, critical conduction mode, and discontinuous conduction mode. Theoretical predictions are verified with the experimental results of a 1kW prototype.

KW - Ac/dc conversion

KW - Boundary control

KW - Power factor corrector

UR - http://www.scopus.com/inward/record.url?scp=42449098419&partnerID=8YFLogxK

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-42449098419&origin=recordpage

U2 - 10.1109/PESC.2006.1712273

DO - 10.1109/PESC.2006.1712273

M3 - RGC 32 - Refereed conference paper (with host publication)

SN - 0780397169

SN - 9780780397163

BT - PESC Record - IEEE Annual Power Electronics Specialists Conference

T2 - 37th IEEE Power Electronics Specialists Conference 2006, PESC'06

Y2 - 18 June 2006 through 22 June 2006

ER -

Boundary control of PFC using state-energy plane

Abstract

Publication series

Conference

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this