APT characterization of some iron-based bulk metallic glasses

M. K. Miller; C. T. Liu; J. A. Wright; W. Tang; K. Hildal

doi:10.1016/j.intermet.2006.01.040

APT characterization of some iron-based bulk metallic glasses

Research output: Journal Publications and Reviews (RGC: 21, 22, 62) › 21_Publication in refereed journal › peer-review

Overview

14 Scopus Citations

Scopus Metrics

View graph of relations

Author(s)

M. K. Miller
C. T. Liu
J. A. Wright
W. Tang
K. Hildal

Detail(s)

Original language	English
Pages (from-to)	1019-1026
Journal / Publication	Intermetallics
Volume	14
Issue number	8-9
Publication status	Published - Aug 2006
Externally published	Yes

Link(s)

DOI	DOI https://doi.org/10.1016/j.intermet.2006.01.040 Final Published version
	Check@CityULib
Link to Scopus	https://www.scopus.com/record/display.uri?eid=2-s2.0-33646489959&origin=recordpage
Permanent Link	https://scholars.cityu.edu.hk/en/publications/publication(7f5f7059-5628-46e1-b5d5-babac0610401).html

Abstract

A microstructural characterization was performed on 3 iron-based bulk metallic glasses. These alloys were an arc cast Fe₆₁Y₂Zr₈Co₆Al₁Mo ₇B₁₅ A2 alloy, a twin roll cast Fe₆₈Y₂Zr₂Nb₂Cr_1.5 V_4.5B₂₀ DarpaQ21 alloy and a vacuum induction melted Fe_50.7Y_1.5Cr_14.5Mo₁₃C_{14 .8}B_5.5 Darva101-Y alloy. The alloys were characterized by scanning electron microscopy and atom probe tomography in the as-cast condition. Some micrometer and nanometer scale precipitates were observed in all 3 alloys indicating that the alloy compositions are not fully optimized in the as-cast state. The Darva101-Y alloy was also characterized after annealing above the onset of crystallization temperature for 1 h at 610 °C. This annealing treatment produced a mixture of crystalline phases: M₆(BC) and Fe₁₄Y₂B in addition to a high temperature M₂₃C₆ phase that is indicated from XRD and previous research. © 2006 Elsevier Ltd. All rights reserved.