Analysis of re-entrant lines: An iterative approach

Yang Liu; Jingshan Li; Shu-Yin Chiang

doi:10.3182/20090603-3-RU-2001.0079

Analysis of re-entrant lines: An iterative approach

Yang Liu, Jingshan Li, Shu-Yin Chiang

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

Abstract

In this paper, we present an approximation method to estimate the production rate of re-entrant lines with exponential machine reliability models. Recursive procedures are developed and structural properties are investigated. The results show that the proposed method provides an acceptable accuracy in production rate approximation for re-entrant lines. © 2009 IFAC.

Original language	English
Title of host publication	Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09
Publisher	IFAC Secretariat
Pages	504-509
Volume	13
ISBN (Print)	9783902661432
DOIs	https://doi.org/10.3182/20090603-3-RU-2001.0079
Publication status	Published - 2009
Externally published	Yes

Publication series

Name	IFAC Proceedings Volumes (IFAC-PapersOnline)
Volume	13
ISSN (Print)	1474-6670

Bibliographical note

Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

Funding

This work is partially supported by University of Kentucky Faculty Research Grant.

Research Keywords

Iteration procedures
Production rate
Re-entrant lines
Serial lines

Access Output

10.3182/20090603-3-RU-2001.0079

Other Access Options

Check CityUHK Library

Permanent Link

Right click to copy link

Cite this

@inproceedings{7b75e010106346f09b0921e913994f54,

title = "Analysis of re-entrant lines: An iterative approach",

abstract = "In this paper, we present an approximation method to estimate the production rate of re-entrant lines with exponential machine reliability models. Recursive procedures are developed and structural properties are investigated. The results show that the proposed method provides an acceptable accuracy in production rate approximation for re-entrant lines. {\textcopyright} 2009 IFAC.",

keywords = "Iteration procedures, Production rate, Re-entrant lines, Serial lines",

author = "Yang Liu and Jingshan Li and Shu-Yin Chiang",

note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].",

year = "2009",

doi = "10.3182/20090603-3-RU-2001.0079",

language = "English",

isbn = "9783902661432",

volume = "13",

series = "IFAC Proceedings Volumes (IFAC-PapersOnline)",

publisher = "IFAC Secretariat",

pages = "504--509",

booktitle = "Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09",

address = "Austria",

}

Analysis of re-entrant lines: An iterative approach. / Liu, Yang; Li, Jingshan; Chiang, Shu-Yin.
Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09. Vol. 13 IFAC Secretariat, 2009. p. 504-509 (IFAC Proceedings Volumes (IFAC-PapersOnline); Vol. 13).

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

TY - GEN

T1 - Analysis of re-entrant lines

T2 - An iterative approach

AU - Liu, Yang

AU - Li, Jingshan

AU - Chiang, Shu-Yin

N1 - Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to [email protected].

PY - 2009

Y1 - 2009

N2 - In this paper, we present an approximation method to estimate the production rate of re-entrant lines with exponential machine reliability models. Recursive procedures are developed and structural properties are investigated. The results show that the proposed method provides an acceptable accuracy in production rate approximation for re-entrant lines. © 2009 IFAC.

AB - In this paper, we present an approximation method to estimate the production rate of re-entrant lines with exponential machine reliability models. Recursive procedures are developed and structural properties are investigated. The results show that the proposed method provides an acceptable accuracy in production rate approximation for re-entrant lines. © 2009 IFAC.

KW - Iteration procedures

KW - Production rate

KW - Re-entrant lines

KW - Serial lines

UR - http://www.scopus.com/inward/record.url?scp=79960927484&partnerID=8YFLogxK

UR - https://www.scopus.com/record/pubmetrics.uri?eid=2-s2.0-79960927484&origin=recordpage

U2 - 10.3182/20090603-3-RU-2001.0079

DO - 10.3182/20090603-3-RU-2001.0079

M3 - RGC 32 - Refereed conference paper (with host publication)

SN - 9783902661432

VL - 13

T3 - IFAC Proceedings Volumes (IFAC-PapersOnline)

SP - 504

EP - 509

BT - Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09

PB - IFAC Secretariat

ER -

Analysis of re-entrant lines: An iterative approach

Abstract

Publication series

Bibliographical note

Funding

Research Keywords

Access Output

Other Access Options

Permanent Link

Other Files and Links

Fingerprint

Cite this