@article{bead4ebae53146839f50257aeb95f390, title = "An interfacial shear term evaluation study for adiabatic dispersed air–water two-phase flow with the two-fluid model using CFD", abstract = "In commercially available Computational Fluid Dynamics (CFD) codes such as ANSYS CFX and Fluent, the interfacial shear term is missing in the field momentum equations. The derivation of the two-fluid model (Ishii and Hibiki, 2011) indicates the presence of this term as a momentum source in the right hand side of the field momentum equation. The inclusion of this term is considered important for proper modeling of the interfacial momentum coupling between phases. For separated flows, such as annular flow, the importance of the shear term is understood in the one-dimensional (1-D) form as the major mechanism by which the wall shear is transferred to the gas phase (Ishii and Mishima, 1984). For gas dispersed two-phase flow CFD simulations, it is important to assess the significance of this term in the prediction of phase distributions. In the first part of this work, the closure of this term in three-dimensional (3-D) form in a CFD code is investigated. For dispersed gas–liquid flow, such as bubbly or churn-turbulent flow, bubbles are dispersed in the shear layer of the continuous phase. The continuous phase shear stress is mainly due to the presence of the wall and the modeling of turbulence through the Boussinesq hypothesis. In a 3-D simulation, the continuous phase shear stress can be calculated from the continuous fluid velocity gradient, so that the interfacial shear term can be closed using the local values of the volume fraction and the total stress of liquid phase. This form also assures that the term acts as an action-reaction force for multiple phases. In the second part of this work, the effect of this term on the volume fraction distribution is investigated. For testing the model two-phase flow data measured at Purdue University is assessed. The interfacial shear term is assembled in ANSYS CFX. Simulation results are presented to assess the effect of the interfacial shear term on the phase distribution.", author = "Sharma, {S. L.} and T. Hibiki and M. Ishii and Schlegel, {J. P.} and Buchanan, {J. R.} and Hogan, {K. J.} and Guilbert, {P. W.}", note = "Publication details (e.g. title, author(s), publication statuses and dates) are captured on an “AS IS” and “AS AVAILABLE” basis at the time of record harvesting from the data source. Suggestions for further amendments or supplementary information can be sent to lbscholars@cityu.edu.hk.", year = "2017", month = feb, day = "1", doi = "10.1016/j.nucengdes.2016.08.032", language = "English", volume = "312", pages = "389--398", journal = "Nuclear Engineering and Design", issn = "0029-5493", publisher = "Elsevier BV", }