A size-dependent quasi-3D model for bending and buckling of porous functionally graded curved nanobeam

In this work, we provide an analysis of the bending and buckling properties of functionally graded (FG) nanobeams with trigonometric function-dependent porosity distribution. Herein, a high-order curved nanobeam model considering both shear deformations and thickness stretching effect is established. Two-phase local/nonlocal stress-driven gradient theory is utilized to capture small-scale effects. Hamilton's principle is adopted to obtain the governing equation and boundary conditions, and the analytical solutions, such as exact formulas for lateral displacement and critical buckling load are obtained by employing Navier's method for simply supported boundary conditions. Furthermore, the effects of local volume fraction, nonlocal parameter, material length scale parameter, shear deformation, material distribution, and porosity distribution pattern in stress-driven models are analyzed in detail. The parametric studies indicate that the thickness stretching effect has a different influence on bending and buckling. In addition, the thickness stretching effect and the opening angle show different coupling mechanisms during bending and buckling. On the other hand, the higher-order buckling mode leads to a more significant scale effect and thickness tensile effect, but reduces the influence of the opening angle. Finally, we find that due to the coupling effect between the pore distribution pattern and the orientation bias of the FG nanobeam, the variation of the material gradient index leads to a different order of the dimensionless critical buckling loads predicted by the three pore distributions. © 2023 Elsevier Ltd.