Skip to main navigation Skip to search Skip to main content

A general and facile method for preparation of large-scale reduced graphene oxide films with controlled structures

  • Hengchang Bi
  • , Shu Wan
  • , Xiehong Cao
  • , Xing Wu
  • , Yilong Zhou
  • , Kuibo Yin
  • , Shi Su
  • , Qinglang Ma
  • , Melinda Sindoro
  • , Jingfang Zhu
  • , Zhuoran Zhang
  • , Hua Zhang*
  • , Litao Sun*
  • *Corresponding author for this work

Research output: Journal Publications and ReviewsRGC 21 - Publication in refereed journalpeer-review

Abstract

Graphene or reduced graphene oxide films (rGOFs) can be prepared by a number of methods including chemical vapor deposition (CVD), filtration, and spin-coating for a variety of applications. However, controlling their surface morphologies and microstructures to meet the requirements of specific applications is still a great challenge. Here, controlled microstructure of large-size rGOF with good electrical and thermal conductivities as well as high sorption ability is produced through a heating-assisted spray method. By simply tuning the heating temperature, the smooth surface and close-packed layered structure of rGOF can be changed to rough surface and porous structure. Impressively, the rapid preparation of rGOF with area as large as ∼216 cm2 in only 6 h has been successfully achieved, which is significant since normally it takes several days to prepare a rGOF with small area of ∼10 cm2 by using conventional filtration method. More importantly, our rGOFs show promising applications in oil sorption, supercapacitors, and thermally/electrically conductive films.
Original languageEnglish
Pages (from-to)162-171
JournalCarbon
Volume143
Online published8 Nov 2018
DOIs
Publication statusPublished - Mar 2019
Externally publishedYes

Funding

H.B. and S.W. contributed equally to this paper. This work was supported by the Fundamental Research Funds for the Central Universities ( 2242017K41006 , and 2242016R20013 ), the National Natural Science Foundation of China (Nos 61274114 , 51420105003 , and 113279028 ), China Postdoctoral Science Foundation funded project (Nos 2017M611653 ), and the “Qianjiang Scholars” program and “Thousand Talent Program” of Zhejiang Province. This work was also supported by MOE under AcRF Tier 2 (ARC 19/15, No. MOE2014-T2-2-093 ; MOE2015-T2-2-057 ; MOE2016-T2-2-103 ) and AcRF Tier 1 ( 2016-T1-001-147 ; 2016-T1-002-051 ), NTU under Start-Up Grant ( M4081296.070.500000 ), and NOL Fellowship Programme Research Grant in Singapore. This research grant is supported by the Singapore National Research Foundation under its Environmental & Water Technologies Strategic Research Programme and administered by the Environment & Water Industry Programme Office (EWI) of the PUB (project No.: 1301-IRIS-47 ). This research is supported by the National Research Foundation , Prime Minister's Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) programme. Appendix A

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 14 - Life Below Water
    SDG 14 Life Below Water

Research Keywords

  • Graphene films
  • Heating-assisted spraying
  • Reduced graphene oxide films
  • Sorption for oils
  • Thermally/electrically conductive films

Fingerprint

Dive into the research topics of 'A general and facile method for preparation of large-scale reduced graphene oxide films with controlled structures'. Together they form a unique fingerprint.

Cite this