Skip to main navigation Skip to search Skip to main content

A compact fully differential Doherty power amplifier

  • Shichang Chen*
  • , Quan Xue
  • *Corresponding author for this work

Research output: Chapters, Conference Papers, Creative and Literary Works › RGC 32 - Refereed conference paper (with host publication) › peer-review

Abstract

In this paper, a compact triple-transistor fully differential Doherty power amplifier (DPA) is investigated. Three active devices are combined in a very judicious way to amplify the differential signal in a way like what a typical Doherty amplifier does. Particularly, two out-of-phase carrier PAs are applied to operate in the low-power region for high efficiency. On the other hand, only one peaking PA is used in the high-power region, which shares its output evenly with the two carriers. The reduction of transistor number from four for a classic differential DPA to three greatly cuts down the realization cost and compacts the overall circuit. Theoretical analysis is given for deep understanding of the operation principle. To demonstrate the proposed technique, a prototype is implemented based on Cree's CGH40010 GaN HEMTs. Experimental result shows that 73% and 63% drain efficiencies are achieved at peak power and 6-dB back-off point, respectively. © 2013 IEEE.
Original languageEnglish
Title of host publication2013 IEEE International Wireless Symposium, IWS 2013
DOIs
Publication statusPublished - 2013
Event2013 IEEE International Wireless Symposium, IWS 2013 - Beijing, China
Duration: 14 Apr 2013 → 18 Apr 2013

Conference

Conference2013 IEEE International Wireless Symposium, IWS 2013
PlaceChina
CityBeijing
Period14/04/13 → 18/04/13

Research Keywords

  • 180° hybrid
  • Differential power amplifier
  • Doherty amplifier
  • load modulation network
  • power-added efficiency (PAE)

Fingerprint

Dive into the research topics of 'A compact fully differential Doherty power amplifier'. Together they form a unique fingerprint.

Cite this