A carrier-based PWM strategy with zero-sequence voltage injection for a three-level neutral-point-clamped converter

Performance of a carrier-based pulsewidth modulation (CB-PWM) strategy can be improved by the inclusion of a zero-sequence voltage in the modulation-reference signal. This paper proposes a new CB-PWM strategy for a three-level neutral-point-clamped (NPC) converter, which is based on a zero-sequence voltage injection. By inclusion of the zero-sequence voltage, the sinusoidal-modulation reference is modified to 1) carry out the voltage-balancing task of the dc-link capacitors, with no additional control effort, 2) reduce the switching losses, and 3) reduce the low-frequency voltage oscillations of the neutral point. The proposed strategy is an alternative approach to the nearest three-vector (NTV) space-vector modulation (SVM) strategy and is obtained by the analysis of the NTV-SVM strategy and establishing a correlation between the NTV-SVM and the CB-PWM strategies. The salient features of the proposed scheme, as compared with the NTV-SVM strategy, are: 1) its reduced computational processing time which is attractive for digital implementation and 2) its reduced switching losses. Compared with the existing CB-PWM strategies, the proposed strategy offers 1) capability to balance the capacitor voltages and reduce the NP voltage oscillations and 2) reduced switching losses. Performance of the proposed CB-PWM strategy for a three-level NPC converter based on time-domain simulation studies in the MATLAB/SIMULINK environment is evaluated and also experimentally verified. © 2011 IEEE.