Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

ISSNs: 0954-4062, 0263-7154, 0022-2542

Additional searchable ISSN (Electronic): 2041-2983

Sage Publications Ltd., United Kingdom

Scopus rating (2020): CiteScore 3 SJR 0.411 SNIP 0.904

Journal

Journal Metrics

Research Output

  1. 2021
  2. Published

    Effect of infill pattern, density and material type of 3D printed cubic structure under quasi-static loading

    Ma, Q., Rejab, M., Kumar, A. P., Fu, H., Kumar, N. M. & Tang, J., Oct 2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 19, p. 4254-4272 19 p.

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 2
    Check@CityULib
  3. 2019
  4. Published

    Scale effect investigation of copper microwire's mechanical properties after in situ scanning electron microscope twisting

    Xue, F., Lu, H. & Shen, Y., 1 May 2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 10, p. 3670-3677

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Check@CityULib
  5. 2016
  6. Published

    A neural network-based distributed parameter model identification approach for microcantilever

    Qi, C., Gao, F., Li, H., Zhao, X. & Deng, L., 1 Dec 2016, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 230, 20, p. 3663-3676

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 2
    Check@CityULib
  7. 2015
  8. Published

    A Neural Network Based Distributed Parameter Model Identification Approach for Micro-Cantilever

    QI, C., GAO, F., LI, H., ZHAO, X. & DENG, L., 2015, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. p. 1-14

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Check@CityULib
  9. 2013
  10. Published

    A fast and adaptive varying-scale morphological analysis method for rolling element bearing fault diagnosis

    Shen, C., He, Q., Kong, F. & Tse, P. W., Jun 2013, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 227, 6, p. 1362-1370

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 59
    Check@CityULib
  11. 2010
  12. Published

    Roughness in elastohydrodynamic contacts

    Hooke, C. J. & Li, K. Y., 2010, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 224, 12, p. 2599-2609

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 7
    Check@CityULib
  13. 2009
  14. Published

    Third-order non-local beam theories for the analysis of symmetrical nanobeams

    Niu, J. C., Lim, C. W. & Leung, A. Y. T., 1 Oct 2009, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 223, 10, p. 2451-2463

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 10
    Check@CityULib
  15. 2008
  16. Published

    An active vibration control model for coupled flexible systems

    Niu, J. C., Leung, A. Y. T., Lim, C. W. & Ge, P. Q., Nov 2008, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 222, 11, p. 2087-2098

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 2
    Check@CityULib
  17. 2007
  18. Published

    Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 1: Low-amplitude, sinusoidal roughness

    Hooke, C. J., Li, K. Y. & Morales-Espejel, G., May 2007, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 221, 5, p. 535-550

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 44
    Check@CityULib
  19. Published

    Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 2: General, non-sinusoidal roughness

    Hooke, C. J., Li, K. Y. & Morales-Espejel, G., May 2007, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 221, 5, p. 551-564

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 35
    Check@CityULib
  20. 2006
  21. Droplet ejection and the induced flowfield by microthermal bubble during growth/collapse process

    Yang, I. D., Wu, T. F., Pan, C., Tseng, F., Yu, R. J. & Chieng, C. C., Aug 2006, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 220, 8, p. 1269-1281

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Check@CityULib
  22. Published

    Buckling of non-uniform columns with an arbitrary number of cracks

    Li, G. Q., Li, Q. S. & Wu, Z., Jun 2006, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 220, 6, p. 773-783

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Check@CityULib
  23. Published

    Rapid calculation of the pressures and clearances in rough, elastohydrodynamically lubricated contacts under pure rolling. Part 1: Low amplitude, sinusoidal roughness

    Hooke, C. J. & Li, K. Y., Jun 2006, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 220, 6, p. 901-913

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 24
    Check@CityULib
  24. Published

    Rapid calculation of the pressures and clearances in rough, elastohydrodynamically lubricated contacts under pure rolling. Part 2: General roughness

    Hooke, C. J. & Li, K. Y., Jun 2006, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 220, 6, p. 915-925

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 22
    Check@CityULib
  25. 2004
  26. Published

    Active suppression of dynamic coupling of the feed supporting system for the square kilometre array using an electrorheological damper

    Su, Y. X., Sun, D. & Duan, B. Y., Dec 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 12, p. 1569-1579

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Check@CityULib
  27. 2003
  28. Published

    Development of a safety/support unit for climbing service robots

    Luk, B. L., Tso, S. K., Ng, A., Yan, S. R. & Xu, Y. S., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 217, 10, p. 1139-1154

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 1
    Check@CityULib
  29. Published
    Check@CityULib
  30. 2001
  31. Bubble size and system pressure effects on the phase distribution for two-phase turbulent bubbly flows

    Kuo, T. C., Yang, A. S. & Chieng, C. C., 2001, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 215, 1, p. 121-132

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 4
    Check@CityULib
  32. 1997
  33. Published

    An approach to mechanism topology identification with consideration of design processes progression

    Zhang, W. J. & Klein Breteler, A. J., 1997, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 211, 3, p. 175-183

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 7
    Check@CityULib
  34. 1993
  35. For the growth of 3 inch D-shaped GaAs crystals by a modified horizontal Bridgman process

    Hsieh, M. H., Chieng, C. C., Lie, K. H. & Guo, Y. D., 1993, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 207, 3, p. 185-194

    Research output: Journal Publications and Reviews (RGC: 21, 22, 62)21_Publication in refereed journalpeer-review

    Scopus citations: 3
    Check@CityULib
Previous 1 2 Next