Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

ISSNs: 0921-5093

Additional searchable ISSN (electronic): 1873-4936

Elsevier Science, Netherlands

Scopus rating (2023): CiteScore 11.5 SJR 1.66 SNIP 1.803

Journal

Journal Metrics
61 - 80 out of 459Page size: 20

Research Output

  1. 2020

  2. Improving mechanical properties of heterogeneous Mg-Gd alloy laminate via accumulated extrusion bonding

    Liu, S., Zhang, J., Chen, X., Huang, G., Xia, D., Tang, A., Zhu, Y., & 2 othersJiang, B. & Pan, F., 21 May 2020, In: Materials Science and Engineering A. 785, 139324.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 45
    Check@CityULib
  3. Published

    Effect of process parameters on microstructure and mechanical properties of friction stir welded CoCrFeNi high entropy alloy

    Qin, X., Xu, Y., Sun, Y., Fujii, H., Zhu, Z. & Shek, C. H., 24 Apr 2020, In: Materials Science and Engineering A. 782, 139277.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 42
    Check@CityULib

  4. Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures

    Guo, F. J., Wang, Y. F., Wang, M. S., He, Q., Ran, H., Huang, C. X. & Zhu, Y. T., 24 Apr 2020, In: Materials Science and Engineering A. 782, 139256.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 31
    Check@CityULib
  5. Published

    Comparison of dislocation density, twin fault probability, and stacking fault energy between CrCoNi and CrCoNiFe medium entropy alloys deformed at 293 and 140K

    Woo, W., Naeem, M., Jeong, J., Lee, C., Harjo, S., Kawasaki, T., He, H., & 1 othersWang, X., 20 Apr 2020, In: Materials Science and Engineering A. 781, 139224.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 54
    Check@CityULib

  6. Linking constituent phase properties to ductility and edge stretchability of two DP 980 steels

    Hu, X., Sun, X., Raghavan, K., Comstock, R. J. & Ren, Y., 7 Apr 2020, In: Materials Science and Engineering A. 780, 139176.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 24
    Check@CityULib

  7. Phase transformation and mechanical properties of Ti-(10–30)Zr–3Mo–1Sn alloys

    Cai, S., Schaffer, J. E., Gao, P., Wang, X. & Ren, Y., 7 Apr 2020, In: Materials Science and Engineering A. 780, 139172.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 6
    Check@CityULib

  8. In-situ investigation via high energy X-ray diffraction of stress-induced(0002)α→(110)β transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy

    Wang, D., Fan, Q., Shi, R., Zhou, Y., Gong, H., Wang, L., Xue, Y., & 1 othersRen, Y., 27 Mar 2020, In: Materials Science and Engineering A. 779, 139154.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 10
    Check@CityULib
  9. Published

    CoNiFeNb0.45 eutectic multi-principal element alloy with excellent mechanical properties and corrosion resistance

    An, X., Chu, C., Zhao, H., Shen, B., Zhou, L. & Chu, P. K., 10 Mar 2020, In: Materials Science and Engineering A. 777, 7 p., 139026.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 8
    Check@CityULib

  10. Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening

    Li, Z., Fang, X., Wang, Y., Jiang, P., Wang, J., Liu, C., Wu, X., & 2 othersZhu, Y. T. & Koch, C. C., 10 Mar 2020, In: Materials Science and Engineering A. 777, 139074.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 40
    Check@CityULib
  11. Published

    Effect of orientation and loading rate on the incipient behavior of Ti60(AlCrVNb)40 medium entropy alloy

    Zhang, X., Huang, J., Lin, P., Chuang, W., Liu, T., Wu, Y., Liao, Y., & 1 othersJang, J. S. C., 21 Feb 2020, In: Materials Science and Engineering A. 775, 138969.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 9
    Check@CityULib

  12. Developing a high-strength Al–11Si alloy with improved ductility by combining ECAP and cryorolling

    Song, D., Wang, G., Zhou, Z., Klu, E. E., Gao, B., Ma, A., Wu, Y., & 3 othersSun, J., Jiang, J. & Ma, X., 31 Jan 2020, In: Materials Science & Engineering A. 773, 138880.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 33
    Check@CityULib
  13. Published

    Hall-Petch and inverse Hall-Petch relations in high-entropy CoNiFeAlxCu1-x alloys

    Chen, S., Aitken, Z. H., Wu, Z., Yu, Z., Banerjee, R. & Zhang, Y., 31 Jan 2020, In: Materials Science and Engineering A. 773, 138873.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 102
    Check@CityULib

  14. Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction

    Cui, Y., Li, C., Zhang, C., Li, R., Ren, Y., Zheng, W. & Wang, Y., 20 Jan 2020, In: Materials Science and Engineering A. 772, 138806.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 31
    Check@CityULib

  15. Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing

    Zhao, Y. H., Bingert, J. F., Topping, T. D., Sun, P. L., Liao, X. Z., Zhu, Y. T. & Lavernia, E. J., 20 Jan 2020, In: Materials Science and Engineering A. 772, 138706.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 33
    Check@CityULib
  16. 2019

  17. Hydrogen embrittlement behaviors of additive manufactured maraging steel investigated by in situ high-energy X-ray diffraction

    Li, S., Liu, M., Ren, Y. & Wang, Y., 24 Oct 2019, In: Materials Science and Engineering A. 766, 138341.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 18
    Check@CityULib

  18. Variation of elastic mechanical properties with texture, porosity, and defect characteristics in laser powder bed fusion 316L stainless steel

    Garlea, E., Choo, H., Sluss, C. C., Koehler, M. R., Bridges, R. L., Xiao, X., Ren, Y., & 1 othersJared, B. H., 19 Aug 2019, In: Materials Science and Engineering A. 763, 138032.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 53
    Check@CityULib

  19. Towards an integrated experimental and computational framework for large-scale metal additive manufacturing

    Hu, X., Nycz, A., Lee, Y., Shassere, B., Simunovic, S., Noakes, M., Ren, Y., & 1 othersSun, X., 22 Jul 2019, In: Materials Science and Engineering A. 761, 138057.

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 17
    Check@CityULib
  20. Published

    Grain-size insensitive work-hardening behavior of Ag microwires

    Li, X., Yang, H., Meng, F., Lu, J. & Lu, Y., 24 Jun 2019, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 759, p. 655-660

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 1
    Check@CityULib
  21. Published

    Influence of rolling temperature on microstructural evolution and mechanical behavior of AZ31 alloy with accumulative roll bonding

    Rao, X., Wu, Y., Pei, X., Jing, Y., Luo, L., Liu, Y. & Lu, J., 29 Apr 2019, In: Materials Science and Engineering A. 754, p. 112-120

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 52
    Check@CityULib

  22. Entropy modeling on serrated flows in carburized steels

    Brechtl, J., Chen, B., Xie, X., Ren, Y., Venable, J. D., Liaw, P. K. & Zinkle, S. J., 10 Apr 2019, In: Materials Science and Engineering A. 753, p. 135-145

    Research output: Journal Publications and Reviews › RGC 21 - Publication in refereed journal › peer-review

    Scopus citations: 22
    Check@CityULib
Previous 1 2 3 4 5 6 7 8 ...23 Next